User manual PENTAX ESPIO140V SPECIFICATIONS

[. . . ] Please read the Pentax User's Safety Guide before using the camera for safe operation. The illustrations used in this manual may differ from the camera's actual appearance. [. . . ] 2 Each time the Date button A is pressed, the blinking digits change in the following manner: Year Month Day Hour Minute, stop pressing the button when the desired digits appear to be corrected. When the battery cover is opened or a new battery is installed, the time is set to 0:00 and no inprinting mode. Focuses on the subject within this frame a Multi AF at wide and Spot AF b Multi AF at telephoto When taking normal pictures, compose your subject within this frame. AF illuminator: When the shutter release button is pressed halfway down in low light condition, the flash discharges to provide illumination, making it easy for the autofocus to work. Check that "0" is blinking before removing the film from the camera. Even if the shutter release button is held down, only one picture is taken. The picture will be taken 10 seconds after the shutter button is pressed. Press the shutter release button halfway down, confirm the green lamp is lit and press the shutter release button fully. The picture will be taken approximately 3 seconds after the self-timer lamp starts to blink. The self-timer lamp will blink rapidly and the picture will be taken after approximately 3 seconds. Use this mode to take a distant landscape or distant subject through a window. The flash will automatically discharge in low light and back light conditions. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]