User manual PANASONIC WV-CP240

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC WV-CP240. We hope that this PANASONIC WV-CP240 user guide will be useful to you.


PANASONIC WV-CP240 : Download the complete user guide (119 Ko)

You may also download the following manuals related to this product:

   PANASONIC WV-CP240 (120 ko)
   PANASONIC WV-CP240 (120 ko)
   PANASONIC WV-CP240 (607 ko)

Manual abstract: user guide PANASONIC WV-CP240

Detailed instructions for use are in the User's Guide.

[. . . ] Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol I or coloured green or green-andyellow. The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black. [. . . ] Rotate this ring clockwise for a C-mount lens or counterclockwise for a CSmount lens. e Lens (option) r Mount Adapter The camera mounting screw hole is for mounting the camera onto a mounting bracket. The camera is originally designed to be mounted from the bottom, however, a topmounting type is also available. To mount from the top, remove the mount adapter from the bottom of the camera by removing two fixing screws. Attach the mount adapter to the top as shown in the diagram, then mount the camera on the mounting bracket. Make sure that two original screws are used when mounting the mount adapter; longer type screws may damage inner components, too shorter type screws may cause the camera drop. t Focus Fixing Screw y Power Cord (only for WV-CP240) Connect this power cord to an electrical outlet of 220 V - 240 V AC 50 Hz. u DC 12 V Input Terminal [DC 12V IN (only for WV-CP242)] This terminal is for connecting the 12 V DC power supply cord. i AC 24 V Input Terminal [AC 24V IN (only for WV-CP244)] This terminal is for connecting the 24 V AC 50 Hz power supply cord. o Synchronization Mode Selector [INT, LL (only for WV-CP240 and WVCP244)] Selects the camera synchronization mode as either internal sync mode (INT) or line-lock mode (LL). !0 Back Light Compensation Mode Selector (BLC ON, OFF) Lets you select the mode according to the position of the object and light conditions on the screen. ON: Select this mode when a strong light such as a spotlight is in the background. !1 Detail/Aperture Level Selector (SHARP, SOFT) The detail/aperture level can be selected with this selector. Set it to the desired position while observing the picture on the monitor. SOFT: Select this position when a Quad System is connected to this camera. [. . . ] q Mount the lens by turning it clockwise on the lens mount of the camera. w Connect the lens cable to the auto iris lens connector on the side of the camera. 10. 5V DC VA - (R x 0. 42 x L) 16V DC L : Cable length (m) R : Resistance of copper wire (/m) VA : DC output voltage of power supply unit L standard = L minimum = L maximum = VA - 12 0. 42 x R VA - 16 0. 42 x R VA - 10. 5 0. 42 x R (meters) (meters) (meters) Focus fixing screw C. WV-CP244 (24 V AC 50 Hz) cs Connect the power cable to the AC 24 V IN terminal on the rear panel of the WV-CP244. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WV-CP240




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WV-CP240 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.