User manual PANASONIC TXL47DT65B

[. . . ] Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C. Not all the features are available depending on the country, area, broadcaster and service provider. This TV may not work correctly with CI module that is not approved by the service provider. [. . . ] Make a note of the PIN number in case you forget it. Select "Adjustment Lock" and set to "On" Lock Settings Change PIN Adjustment Lock On set select To change the PIN number Select "Change PIN" Lock Settings Change PIN Adjustment Lock Access On Enter a new PIN number twice access ghi abc jkl tuv def mno wxyz select pqrs 48 Adjust the detailed picture settings Advanced Settings To make settings Advanced Settings R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults "How to Use Menu Functions" to (p. 27) 2. 2 Reset Menu Advanced Settings Advanced Settings Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults Adjustments / Configurations (alternatives) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Press the OK button to reset to the default Advanced Settings Advanced Settings White Balance Colour Management Gamma Menu White Balance Copy the settings to the other input Copy Adjustment You can copy the selected "Professional1" or "Professional2" settings to that of the other input. The settings of Contrast, Brightness, Colour, Sharpness, Tint and Advanced Settings will be copied. Select the destination to copy to Copy Adjustment Destination All You cannot copy to the locked mode. Picture Picture Advanced Picture Settings For the mode of "Professional1" or "Professional2" in "Viewing Mode" White Balance Access Access Access White Balance R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Reset to Defaults Colour Management Colour Management R-Hue G-Hue B-Hue R-Saturation G-Saturation B-Saturation Reset to Defaults Gamma Gamma Gamma Reset to Defaults 2. 2 Reset Reset Reset Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Reset to Defaults R-Hue G-Hue B-Hue R-Saturation G-Saturation B-Saturation Reset to Defaults Gamma Adjustments / Configurations (alternatives) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Press the OK button to reset to the default White Balance Adjusts the picture hue of red area Adjusts the picture hue of green area Adjusts the picture hue of blue area Adjusts the saturation of red area Colour Management Gamma Advanced Adjusts the saturation of green area Adjusts the saturation of blue area Press the OK button to reset to the default Colour Management Switches the gamma curve (1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Reset to Defaults Press the OK button to reset to the default Gamma select copy 49 USB HDD Recording You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. Analogue TV programme cannot be recorded to the USB HDD. The data broadcasting (MHEG, etc. ), radio broadcasting and the periods without any signal will not be recorded. Not all the programmes can be recorded depending on the broadcaster and service provider. If the remaining capacity of the USB HDD is run out, the recording cannot be done. Check the USB HDDs that have been tested for the performance with this TV at the following website. (English only) http://panasonic. jp/support/global/cs/tv/ Caution Register the USB HDD with this TV in order to use it for recording. Please note that USB HDD will be formatted and all data (including the data from your PC, etc. ) in it will be erased when you register it. In order to use the USB HDD with your PC after you use it with this TV for recording, format the drive on your PC. Please note that all data in the USB HDD will be erased when it is formatted. To change the status yellow You can also remove the USB HDD safely from Media Player "Remove the USB devices safely" (p. 55) To unregister the registered USB HDD Once you unregister the USB HDD, it will not be possible to playback any of the recorded content on any TV. Select the USB HDD Unregister red The confirmation screen will be displayed twice. Select "Yes" to unregister. 51 USB HDD Recording Recording the TV programme to USB HDD You can record the current programme immediately by using "One Touch Recording". You can also record the current programme constantly for the selected period by using "REW LIVE TV" so that you can go back or pause the current programme. Ensure the connection, registration and setup are completed before start recording p. 51 Ensure not to connect or disconnect any USB devices during USB HDD recording. Otherwise the recording may not work properly. 1 MENU EXIT Display the menu MENU 2 Select "Setup" Main Menu Picture Sound Setup access select 3 REC Select "USB HDD Setup" Setup Menu Timer Programming Off Timer USB HDD Setup Link Settings Child Lock DVB-C Tuning Menu Language Display Settings Common Interface 1/2 Off Access access select DVD/VCR TV TV 4 Select "One Touch Recording" or "REW LIVE TV" USB HDD Setup Device Setup One Touch Recording REW LIVE TV 180 minutes Off To return to TV EXIT select 5 Set 52 One touch direct TV recording - What you see is What you record One Touch Recording Recording the current programme in the USB HDD immediately. Select the maximum recording time (30 / 60 / 90 / 120 / 180 minutes) USB HDD Setup Device Setup One Touch Recording REW LIVE TV 180 minutes Off select LED LED will turn to orange (flash) while One Touch Recording is in progress. To start One Touch Recording Set the position to "TV" DVD/VCR TV Start REC No other channel can be selected while the recording is in progress. To stop recording on the way DVD/VCR TV EXIT IDE GU or To playback or delete the recorded contents "Using Media Player" (p. 26) Even if One Touch Recording is in progress, you can playback all the contents. However, the recording may not work properly while playback. USB HDD Recording Record constantly REW LIVE TV Recording the current programme constantly. Select "On" to start REW LIVE TV USB HDD Setup Device Setup One Touch Recording REW LIVE TV 180 minutes On select When you select "On", the recording will start automatically. To operate the REW LIVE TV Set the position to "TV" DVD/VCR TV To pause To search backward (press and hold) Advanced After pausing or searching backward, the following buttons are available to operate. [. . . ] The panel might move slightly when it is pushed with a finger, and clattered sound might be heard. This is not a malfunction. Overcurrent error message appears The connected USB device might cause this error. Remove the device and turn the TV Off with Mains power On / Off switch, then turn it On again. Check if foreign objects are inside the USB port. FAQs, etc. An error message appears Follow the message's instructions. [. . . ]