User manual PANASONIC SUR1AE

[. . . ] Book 3 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Book 4 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. [. . . ] ≥ Both Re-master and Direct mode cannot be set to “On”. ‰ When “Digital Output”, “Analog Output” and “Digital Link” are set to “Off”, no sound will be output. ‰ When a headphone plug is connected, even if “Analog Output” is set to “Off”, it is not possible to disable the analogue audio output. ‰ It may take some time to output audio when you have adjusted the audio quality. Book 21 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Others Sleep timer The sleep timer can switch the unit to standby mode after a set time. Auto off function English This unit is designed to conserve its power consumption and save energy. The unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes. Each time you press the button: “30 minutes” "# “60 minutes” "# “90 minutes” "# “120 minutes” ^"""""""""""""" “Off” ! """""""""""""n To cancel this function 1 Press [SETUP]. ‰ You can also set the sleep timer by selecting “SLEEP” using the menu screen. ‰ The auto off function works unless you turn it off, even if you turn off and on this unit. Book 22 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. ‰ For the update information (new or improve features), refer to the following website. Com/support/firmware/ Preparation ≥ Connect this unit to the network. ( Remote control code When other equipment responds to the supplied remote control, change the remote control code. Point the remote control at this unit, and press and hold [OK] and the numeric button for at least 4 seconds. ‰ When the remote control code is changed, the new code will appear on the display for a few seconds. [OK] + [1] [OK] + [2] Set the code to “Mode 1” Set the code to “Mode 2” 14) – Make sure that the network is connected to the Internet. Do not disconnect the AC mains lead or press the unit on/off button to the [ ] position while one of the following messages is displayed. €Linking” or “Updating” ≥ During the update process, no other operations can be performed. Changing the character encoding You can change the character encoding of track names, artist names and other information when they are not displayed as they should be. ‰ When the update has finished successfully, “Success” is displayed. [. . . ] Book 20 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Ljudjustering Följande ljudeffekter kan läggas till ljudutmatningen. Book 22 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Uppgradering av fast programvara Ibland kan Panasonic släppa ut uppdaterad firmware för denna enhet för att lägga till eller förbättra en funktion. ‰ Se till att enheten och apparaten är anslutna till samma nätverk. Se till att det trådlösa nätverket är anslutet till Internet. [. . . ]