User manual PANASONIC SC-PM500

[. . . ] SAFETY PRECAUTIONS Operating Instructions Placement Set the system up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the service life of the system. Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects. Do not place heavy items on the system. SPECIFICATIONS Foreign matter Do not let metal objects fall inside the system. [. . . ] Press [DEL] in the stop mode. 2 3 Within 10 seconds, press [R, T] to set the time. Press [OK]. To set the code to "REMOTE 2" 1 Press and hold [CD] on the main unit and [2] on the remote control until "REMOTE 2" is shown. 2 2 Press and hold [OK] and [2] for a minimum of 4 seconds. 2 Press and hold [OK] and [1] for a minimum of 4 seconds. Stop playback Pause playback Skip album Skip track Press [CLOCK/TIMER] to show the clock for a few seconds. Note: Reset the clock regularly to maintain accuracy. 2 3 4 5 6 Within 10 seconds, press [R, T] to set the start time. Do steps 2 and 3 again to set the end time. 13 MAINTENANCE Sleep timer The sleep timer switches off the system after the set time. 30 MIN 60 MIN OFF 90 MIN 120 MIN To start the timer Press [#, PLAY] to start "#PLAY 1", "#PLAY 2" or "#PLAY 3". 1) Press [#, PLAY] two times to remove the timer indicator on the display panel. Press [CLOCK/TIMER] to select "#PLAY 1", "#PLAY 2" or "#PLAY 3". Press [#, PLAY] two times to remove the timer indicator on the display panel. To clean this system, wipe with a soft, dry cloth. · Never use alcohol, paint thinner or benzine to clean this system. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. Search Press and hold [3] or [5] through track (main unit: [2/3] or [5/6]). 14 TROUBLESHOOTING GUIDE Repeat playback You can repeat "Program playback" or other selected "Playmode function". 1 Press [PLAY MENU] to select "REPEAT". 2 Press [Y, U] to select "ON REPEAT" and then press [OK]. To cancel, select "OFF REPEAT". Cancel program mode Replay the program Check program contents 7 1 2 To show the remaining time Press [SLEEP]. RADIO 1 2 3 Press [OK] to select "LOWEST" or "CURRENT" frequency. Press [RADIO MENU] to select "A. PRESET" and then press [OK]. Press [OK] to start presetting. Change the settings Change the source or volume Check the settings Cancel Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. Manual tuning Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN(USB)]) to select "FM". To tune automatically, press and hold the button until the frequency starts changing quickly. Note: · The sleep timer can be used together with the play timer. Be sure not to set an overlap of timers. Common problems No operations can be done with the remote control. · Switch off the system, determine and correct the cause, then switch the system on again. It can be caused by straining of the speakers through excessive volume or power, and when using the system in a hot environment. Keep other appliances and cords away from the cables of this system. Main unit displays "NO PLAY" · Examine the content. · If there are more than 255 albums or folders (audio and non-audio), some of the MP3 files in these albums cannot be read and played. Alternatively, reformat the USB mass storage device and save these music albums prior to saving the other non-audio folders. [. . . ] iPhone (not included) Dock adapter (not included) Press [R, T] and then press [OK]. Memory presetting 20 channels can be preset. The new station replaces any station that occupies the same preset number. Note: You cannot preset a station when the station is not broadcasting or when you have selected a secondary service. You can connect and play MP3 tracks from your USB mass storage device. The system cannot recognise USB mass storage device connected through a cable. [. . . ]