User manual PANASONIC SABT200

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BT303 SC-BT300 SC-BT203 SC-BT200 The illustration shows the image of the unit SC-BT300 with "P" indicated on the packaging. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] Current Installed Version: x. x OK RETURN RQT9508 32 During the update process, no other operations can be performed. Serious damage may occur if you turn off the unit and/or press any buttons. 1) Press [SETUP]. 5) Press [2, 1] to select "Yes" and press [OK]. Network settings These settings are used if you will connect this unit to the Internet. The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. ( 14) Testing of "IP Address/DNS Settings" Always test the connection when a LAN cable is connected. Setting the IP address In most cases, default settings can normally be used without making any changes. Set the IP address only when the router has no DHCP server functions or when the router's DHCP server function is disabled. 1 Press [BD/SD] to select "BD/DVD" or "SD". 4 Press [3, 4] to select "IP Address/DNS Settings" and press [OK]. 5 Press [3, 4] to select "Connection Test" and press [OK]. IP Address/DNS Settings Connection Test IP Address Auto Configuration ( DHCP ) IP Address Subnet Mask Default Gateway DNS Auto Configuration ( DHCP ) Primary DNS Secondary DNS Auto Detect Connection Speed Connection Speed Setting OK RETURN On 5 Press [3, 4] to select "IP Address Auto Configuration ( DHCP )" and press [2, 1] to select "Off". 6 Press [3, 4] to select "IP Address", "Subnet Mask" or "Default Gateway" and press [OK]. 7 Enter numbers with the numbered buttons and press [OK]. After checking the specifications for your broadband router, enter each number. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the "IP Address" and the same number for others. The numeric input range is between 0 and 255. After performing steps 1 to 4 ( left) On On 8 Press [2, 1] to select "Yes" and press [OK]. NOTE "Testing. . . ":The test is in progress. Perform the "Connection Test" also when any change was made to the "IP Address/DNS Settings". Setting the DNS-IP In most cases, default settings can normally be used without making any changes. When setting an assigned DNS server from your Internet service provider, perform the following settings. NOTE Network IP Address/DNS Settings Proxy Server Settings Network Service MAC Address: xx-xx-xx-xx-xx-xx Follow the instructions given by your Internet service provider and enter the numbers. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable and assign the same number. If a wrong number is entered, then press [CANCEL]. Primary DNS OK RETURN Please input Primary DNS and press [OK]. To clear this setting, delete all characters and press [OK]. 192 . 1 . . 0-9 Number 8 Press [2, 1] to select "Yes" and press [OK]. The numeric input range is between 0 and 255. NOTE RQT9508 Advanced operations If the connection test fails, it may be necessary to set the MAC address of this unit at the router side. The MAC address can be displayed by pressing [SETUP] and selecting "Network". 5 Press [3, 4] to select "DNS Auto Configuration ( DHCP )" and press [2, 1] to select "Off". 6 Press [3, 4] to select "Primary DNS" or "Secondary DNS"and press [OK]. 7 Enter numbers with the numbered buttons and press [OK]. After performing steps 1 to 4 ( left) 33 Network settings Setting the connection speed When the connection test results in "Fail" after the IP and DNS-IP addresses are assigned, perform the following settings. Setting the proxy server In most cases, default settings can normally be used without making any changes. Please use this setting when instructed to by your Internet service provider. [. . . ] Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; purchase Parts, Accessories, or obtain Literature by visiting our Web Site at: http://www. panasonic. com/help or, contact us via the web at: http://www. panasonic. com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www. pstc. panasonic. com or, send your request by E-mail to: npcparts@us. panasonic. com You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday ­ Friday 9 am to 9 pm, EST. ) Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks) Reference For hearing or speech impaired TTY users, TTY : 1-866-605-1277 Product Repairs (United States and Puerto Rico) Centralized Factory Service Center MAIL TO: Panasonic Service and Technology Company 410B Airport Road Elgin, IL 60123-9333 Attention: BD/DVD Repair Please carefully pack and ship, prepaid and insured, to the Elgin Centralized Factory Service Center. RQT9508 58 As of October 2008 Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. PANASONIC PRODUCT--LIMITED WARRANTY Panasonic Canada Inc. [. . . ]