User manual PANASONIC NVGS27E

[. . . ] KX-TG6711 KX-TG6712 KX-TG6713 KX-TG6721 series KX-TG6721 KX-TG6722 KX-TG6723 KX-TG6724 KX-TG6761*1 *1 Base unit Part No. KX-TG6711 KX-TG6711 KX-TG6711 KX-TG6721 KX-TG6721 KX-TG6721 KX-TG6721 KX-TG6721 Handset Part No. KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 Quantity 1 2 3 1 2 3 4 1 A DECT repeater (KX-TGA405EX) is supplied in this model. By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. [. . . ] 0844 844 3899 Ireland 01289 8333 TG67xxE(en)_0802_ver102. pdf 24 2012/08/02 16:27:46 Programming Sub-menu 1 Settings Sub-menu 2 Number of Rings*2 Settings 2–9: 2-9 Rings 5: <5 Rings> 0: Auto 1: 1 Minute 3: <3 Minutes> 0: Greeting Only*3 – 1: <On> 0: Off – – Code #211 38 Recording Time*2 #305 39 Remote Code*2 Call Screening Answer On*2 Answer Off*2 Main menu: Sub-menu 1 Set Date/Time*2 Memo Alarm “Time Settings” Sub-menu 2 – 1–3: Alarm1-3 Settings – – #306 #310 #327 #328 37 35 35 35 Code – #101 #720 16 28 1: Once 2: Daily 3: Weekly 0: <Off> 1: <Caller ID> 0: Manual Time Adjustment*2, *4 Main menu: Operation Paging the desired unit. “Intercom” – #226 – Code #274 41 Helpline Tel. 0844 844 3899 Ireland 01289 8333 25 TG67xxE(en)_0802_ver102. pdf 25 2012/08/02 16:27:46 Programming Main menu: Sub-menu 1 Ringer Setup “Initial Setup” Sub-menu 2 Ringer Volume – Handset Ringer Volume – Base Unit*1, *2 Ringtone*5, *6 (Handset) Night Mode – On/Off Night Mode – Start/End Night Mode – Ring Delay Settings 0–6: Off–6 <6> 0–6: Off–6 <3> <Ringtone 1> 1: On 0: <Off> <23:00/06:00> 1: 30 sec. 0: No Ringing 1: <On> 0: Off – 1: Once 2: Daily 3: Weekly 0: <Off> 1: <Caller ID> 0: Manual – – 1: <Normal> 2: Low 1: <On> 0: Off 1–6: Level 1-6 <3> – 1: <On> 0: Off – 1: On 0: <Off> Code #160 #G160 #161 #238 #237 #239 20 – – 29 29 29 First Ring*2, *7 Time Settings Set Date/Time*2 Memo Alarm – 1–3: Alarm1-3 #173 #101 #720 – 16 28 Time Adjustment*2, *4 Handset Name Caller Barred*2 Eco Setup Display Setup – – Transmission Power*2 LCD & Key Backlight Contrast (Display contrast) Top Key Setup Keytones*8 Call Restrict*2 Auto Talk*9 – – – – #226 #104 #217 #725 #276 #145 #278 #165 #256 #200 – 29 30 17 – – 17 – 30 19 26 Helpline Tel. 0844 844 3899 Ireland 01289 8333 TG67xxE(en)_0802_ver102. pdf 26 2012/08/02 16:27:46 Programming Sub-menu 1 Line Setup Sub-menu 2 Recall/Flash*2, *10 Settings 0: 900 msec. 1: On 0: <Off> <0000> 1: <On>*12 0: <Off>*13 – – <English> Code #121 20 Privacy Mode*2, *11 Base Unit PIN*2 Repeater Mode*2 Register – – – Register H. set (H. set: handset) Cancel Register*3 Display #194 #132 #138 #130 #131 #110 – 31 32 31 31 16 Language Main menu: Sub-menu 1 Ringer Volume Ringtone*5, *6 (Handset) Night Mode “Ringer Setup” Sub-menu 2 Handset Base Unit*1, *2 – On/Off Start/End Ring Delay Settings 0–6: Off–6 <6> 0–6: Off–6 <3> <Ringtone 1> 1: On 0: <Off> <23:00/06:00> 1: 30 sec. 0: No Ringing 1: <On> 0: Off Code #160 #G160 #161 #238 #237 #239 20 – – 29 29 29 First Ring*2, *7 Main menu: Operation Storing/Viewing bar call numbers. *1 KX-TG6721 series: page 3 – #173 – “Caller Barred”*2, *14 Code #217 30 Helpline Tel. 0844 844 3899 Ireland 01289 8333 27 TG67xxE(en)_0802_ver102. pdf 27 2012/08/02 16:27:46 Programming *2 *3 *4 If you program these settings using one of the handsets, you do not need to program the same item using another handset. This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. (Caller ID subscribers only) To use this feature, set the date and time first (page 16). (KX-TG6721 series: page 3) R If you have set the alarm, the alarm sounds even if the night mode is turned on. 1 2 #239 MbN: Select the desired setting. a aM N Note: R When the answering system answers the call, this feature does not work. (KX-TG6721 series: page 3) Changing the handset name Each handset can be given a customised name (“Bob”, “Kitchen”, etc. ). You can also select whether or not the handset name is displayed in standby mode. 0844 844 3899 Ireland 01289 8333 29 TG67xxE(en)_0802_ver102. pdf 29 2012/08/02 16:27:47 Programming “Yes” without entering any handset name, “Handset 1” to “Handset 6” is displayed. 2 3 1 2 3 4 5 #104 Enter the desired name (max. M N Viewing/editing/erasing bar call numbers 1 2 3 #217 MbN: Select the desired entry. a aM N To erase a number: a MbN: “Yes” a aM Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: R When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list after the call is (page 33) with disconnected. N Note: R When editing, press the desired dial key to to erase. add, Setting call restriction You can restrict selected handsets from dialling certain numbers. [. . . ] R If your unit is connected to any additional telephone equipment, remove and plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. R Depending on your service provider/telephone company, the unit may display the caller’s information at the 2nd ring or later. R Incorrect time information from incoming Caller ID changes the time. [. . . ]