User manual PANASONIC NRBN30

[. . . ] Deutsch NR-BN30PGW NR-BN30PGB NR-BN30PS1 NR-BN30QGW NR-BN30QGB NR-BN30QW1 NR-BN30QS1 Français Italiano Español Português NR-BN30PGW NR-BN30PGB NR-BN30QGW NR-BN30QGB NR-BN30PS1 NR-BN30QW1 NR-BN30QS1 Čeština Polski English 3-19 Thank you for purchasing this Panasonic product. 17 English Safety instructions What the symbols mean: Do not Make sure you do this Indicates the appliance must be earthed to prevent electric shock Do not take apart WARNING Indicates risk of death or serious injury. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. [. . . ] € When the refrigerator door is closed and no buttons are operated for 3 minutes, the control panel light turns off. When the control panel light is off, open the refrigerator door or press any button to turn it on. € Alarm indicator will flash and alarm will be heard at the same time. • The anti-scratch protective film is pasted on the control panel. € The settings may change if you touch a button when cleaning the control panel. Press “Fridge” 9, and when the fridge temperature display c flickers, the temperature can be set. Each time the button is pressed, the temperature changes (the fridge temperature display 3 shows the temperature accordingly). (Temperatures cannot be set when in the following modes: “Fast-Cooling”, “Home” and “Vacation”. While setting the temperature, if no buttons are operated for five seconds, the fridge temperature display 3 stops flickering, and the set temperature automatically comes into effect. Each time “Fridge” 9 is pressed, the temperature setting progresses through the following cycle. 2°C → 3°C → 4°C → 5°C →6°C → 7°C → 8°C → OF→ 2°C; (“OF” represents the OFF state, and the refrigerator is not cooled. Press “Freezer” :, and when the freezer temperature display 4 flickers, the temperature can be set. Each time the button is pressed, the temperature changes (the freezer temperature display 4 shows the temperature accordingly). (Temperatures cannot be set when in the following modes: “Fast-Freezing”, “Home” and “Vacation”. While setting the temperature, if no buttons are operated for five seconds, the freezer temperature display 4 stops flickering, and the set temperature automatically comes into effect. Each time “Freezer” : is pressed, the temperature setting progresses through the following cycle. -24°C → -23°C → -22°C → -21°C → -20°C → -19°C → -18°C → -17°C → -16°C → -24°C; 9 : ; < Using the handy functions Fast Cooling Mode 5 7 6 8 Under Fast-Cooling Mode, the refrigerator is set to 2 °C, and the refrigerator temperature cannot be changed. To enter Fast-Cooling Mode Press “Function” ; until the “Fast-Cooling” icon 5 flickers, and then press “OK” <. Fast-Cooling Mode is activated, and the “Fast-Cooling” icon 5 lights up. To quit Fast-Cooling Mode While in Fast-Cooling Mode, press “Function” ; until the “Fast-Cooling” icon 5 flickers, and then press “OK” <. Fast-Cooling Mode is canceled, and the “FastCooling” icon 5 turns off. The refrigerator temperature goes back to the value from before Fast-Cooling Mode. [. . . ] € Has the food been packed too tightly together or is the room temperature high?In cases like these, the compressor runs hard so it’s normal for the compressor to be louder. The compressor has been running • When the mains plug has been connected for the first time, the compressor runs longer than usual in order to cool down the inside of the refrigerator until for a long time. € Have the food items been packed too tightly together or is the room temperature high? [. . . ]