User manual PANASONIC NN-CD550W

[. . . ] QQThe following charts indicate the degree of damage caused by wrong operation. Modifying, touching on or placing near heating elements, bending, twisting, pulling, pulled over sharp edges, putting heavy objects on top, bundling the mains lead and carrying the appliance by the mains lead. ) Mains lead Mains plug ODo not use the appliance if the mains lead or mains plug is O damaged or the mains plug is loosely connected to the household mains socket. ) ««If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. [. . . ] GB21) Espresso Coffee Note • If Latte Macchiato is pressed, the display will return to the main menu. Cappuccino shaft with measuring spoon of 3 Fill the powder coffee lids. Thenfresh coffee powder and close the a cup(s) press • Make sure the powder coffee shaft is dry before filling with coffee powder. Note • In order to reduce heat and splashing, adjust the dispenser height to suit your cup size by moving it up and down. € Do not fill the powder coffee shaft with water-soluble, freeze-dried, instant products or other drink powders. € Press or repeatedly to adjust quantity for coffee and/or milk foam. € If is pressed, the display will return to the select drink menu (step 2). At same time the Espresso machine release the coffee powder into the waste container. : Cappuccino 60% : 40% = milk : coffee Note • When “Latte Macchiato” is selected, the cup filling quantity will be displayed as 80% and 20%. : Cappuccino) Note • If is pressed during the brewing process, it immediately stops the process. : Espresso/Coffee) O When brewing is completed, display will return to the main menu. € If is pressed, the display will return to the previous display without saving the setting. € When setting is completed, the display will return to the user menu. GB29 Changing the setting Auto off timer Select auto off timing from 5 auto off times (1–5 hours). (Default setting: 1 hour) (Continued) Cup illumination Select cup illumination on the dispenser from 3 modes. To save the Select desired operating mode and press to save the setting. (Auto) Cup illumination is turned on and off by operation of the espresso machine. GB47 Note • If there is no action for 30 seconds, the display will return to the main menu without saving the setting. € If is pressed, the display will return to the previous display without saving the setting. € When setting is completed, the display will return to the user menu. GB31 Changing the setting Reset You can reset all settings to factory settings by this mode. (Continued) Information This displays the total cups made and setting information for this espresso machine. [. . . ] GB45 Troubleshooting Problem (Continued) Cause and Action Display shows “Descaling programme” or “Cleaning the milk system” when power is turned on. Display shows “Refill with coffee beans” even though there are sufficient coffee beans. OOThe espresso machine is turned off without cleaning last time of use. GB41, GB42) « OOIf oily coffee beans are used, it may be difficult for them to flow into the grinder. [. . . ]