User manual PANASONIC NC-ZA1

[. . . ] € NC-ZA1 English Deutsch Nederlands Français Italiano Español Contents Page GB3 GB9 GB10 GB11 GB13 GB15 GB16 GB19 GB21 GB24 GB26 GB27 GB29 GB33 GB35 GB44 GB46 GB47 GB47 Safety Precautions Important Information Electrical Requirement (For UK market only) Parts Names and Handling Instructions Display Flavour setting Before Use Espresso/Coffee Cappuccino/Latte Macchiato/Hot milk Powder coffee preparation Hot water Turn off the power Changing the setting Memory setting How to Clean Troubleshooting Error display Replacement parts Specifications GB2 Thank you for purchasing the Panasonic product. € Please read these instructions carefully to use the product correctly and safely. € Before using this product please give your special attention to “Safety Precautions” (Page GB3–GB8). In order to prevent accidents or injuries to the user, other people, and damage to property, please follow the instructions below. [. . . ] Then under the Note • If simple rinsing is skipped after milk menu, milk residue may mix into the hot water. Note • If is pressed, the display will return to the previous menu. € If is pressed during the brewing process, it immediately stops the process. GB27 GB26 Turn off the power After the power is turned off, the cleaning cycle starts. The cleaning cycle will vary depending on which menus have been used whilst the espresso machine is turned on. € If milk system cleaning is not necessary, cleaning will start from step 3. € If the coffee or milk menus are not prepared, it will turn off without cleaning. (Only for milk menu) Fill 1 a glass with 250 mL of water and • If the milk hose is not attached, attach it to espresso machine. Note (Convert into the quantity per 250 mL of • Be careful with steam coming out after is pressed. ) • If is not pressed for 15 minutes, the espresso machine will Place an empty cup under the dispenser. (Cup size > 250 mL) is pressed, it immediately stops the rinsing process. € Clean the milk foamer nozzle every day that a milk menu drink is prepared. GB38) Fill 2 the glass with clean water and press to start the rinsing cycle again. (Cup size > 250 mL) GB27 Turn off the power 3 Press (Continued) to start the rinsing cycle. When the rinsing cycle has finished, the turn off without running the rinsing cycle. Then unplug the espresso • If is pressed, it immediately stops the rinsing process. After • If is not pressed for 15 minutes, the espresso machine will flashes, the display will return to the previous display. Espresso machine will turn off automatically in the following conditions. In that case, the machine starts with the cleaning cycle the next time power is turned on. Eco mode Standard mode Standby mode Low High (Eco mode) There is a short wait as the heating system is only switched on when a drink is to be brewed. (Standard mode) The heating system is turned on, only for coffee and espresso with a short waiting time. Note • If there is no action for 30 seconds, the display will return to the main menu without saving the setting. [. . . ] «Feed them towards the grinder or try other types of coffee beans. « OODepending on the type of beans, there may be a lot of crema. ) Error display Display Cause and Action If this message appears on the display, 1  urn off the espresso machine. T 2  ait until the espresso machine has cooled down completely then turn the power on again. [. . . ]