User manual PANASONIC KXTG7200FR

[. . . ] To power outlet (120 V AC, 60 Hz) AC adaptor Hooks Charger unit (KXTG7200FR only) To power outlet (120 V AC, 60 Hz) AC adaptor Bottom of the charger Fasten the AC adaptor cord to prevent it from being disconnected. Note: L Use only the included Panasonic AC adaptor PQLV19. L Make sure that the AC adaptor and telephone line cords are plugged into the unit properly. [. . . ] (It is normal for the adaptor to feel warm during use. ) Printed in U. S. A. Hooks PQQW13542ZA DA1104SY0 TG2431_2432_QG(e). fm Page 2 Thursday, November 25, 2004 10:08 AM Battery installation 1 Insert the battery (1), and press it down until it snaps into the compartment (2). 2 Close the handset cover. 2 1 Battery charge Place the handset on the base unit or charger for 6 hours before initial use. Base unit Charger unit (KXTG7200FR only) CHARGE indicator CHARGE indicator Navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display, by pressing {^}, {V}, {<}, or {>}. Soft keys The handset features 2 soft keys. By pressing a soft key, you can select the function displayed directly above it. Rcvd Kcalls Phone book L ­2­ TG2431_2432_QG(e). fm Page 3 Thursday, November 25, 2004 10:08 AM Setting the date and time Set the date and time so that the unit will announce the day and time each message was recorded by the answering system when you play back messages. 1 2 3 Press {MENU}. Enter the current month, day, and year by selecting 2 digits for each. Example: June 15, 2005 Press {0}{6} {1}{5} {0}{5}. 4 Enter the current hour and minute (12hour clock format) by selecting 2 digits for each. Example: 9:30 PM Press {0}{9} {3}{0}. Date:06. 15. 2005 Time:12:00 AM KAM/PM SaveL Date:12. 31. 2005 Time:12:00 AM KAM/PM SaveL 5 Select "AM" or "PM" by pressing {AM/ PM}. Date:06. 15. 2005 Time:09:30 AM KAM/PM SaveL 6 Press {Save}, then press {OFF}. Recording your greeting message You can record your own greeting message (max. 2 minutes) that will be played when the answering system answers a call. If you do not record a greeting message, a pre-recorded greeting message will be used. {GREETING REC} {GREETING CHECK} 1 2 3 4 Press {GREETING REC}. If the Call Waiting Caller ID (CWID) feature does not function: L You may need to contact your telephone company to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). If you subscribe to a flat-rate bundle service that includes Caller ID, Call Waiting, Voice Mail, and unlimited local/regional/long distance calls, please read the following: L To use the Voice Mail service provided by the telephone company rather than the unit's answering system, turn off the answering system by pressing {ANSWER ON} on the base unit. This unit does not have an indicator to indicate if there are new messages in your mailbox service. L To use this unit's answering system rather than the Voice Mail service provided by your telephone company, please contact your telephone company to deactivate your Voice Mail service. If the telephone company cannot do this, set this unit's "Ring count" setting so that this unit's answering system answers calls before the telephone company's voice mail service tries to answer your calls. It is necessary to check the ring count required to activate the Voice Mail service provided by your telephone company before changing this setting. Example: To set the ring count to "2", press {MENU} {0} {6} {1}. [. . . ] It is necessary to check the ring count required to activate the Voice Mail service provided by your telephone company before changing this setting. Example: To set the ring count to "2", press {MENU} {0} {6} {1}. [. . . ]