User manual PANASONIC KXTG7100FR

[. . . ] or Puerto Rico. TG2388. book 2 Table of Contents Introduction Accessory information . 28 Editing a caller's phone number before calling back using the handset . 24 One-Touch Dialer Storing an item in the phonebook to the one-touch dialer using the handset . 26 2 For assistance, please visit http://www. panasonic. com/consumersupport TG2388. book 3 Table of Contents Answering System Features Answering system . [. . . ] Scroll to "Ringer setting" by pressing {V} or {^}, then press {Select}. Scroll to "Ringer tone"by pressing {V} or {^}, then press {Select}. If the handset ringer volume has been turned off, the handset will not ring. Press {Save}, then press {OFF}. 6 Handset incoming call tone During an intercom call (page 32), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. 5 Base unit ringer tone Using the base unit Make sure the base unit is not being used. Press VOLUME {<} or {>}, then select the desired ringer tone by pressing {1} to {7}. {1} to {3} : Bell ringer patterns {4} to {7} : Melody patterns L After pressing VOLUME {<} or {>}, the base unit will ring using the current ringer tone. Scroll to "Ringer setting" by pressing {V} or {^}, then press {Select}. Scroll to "Incoming call. " by pressing {V} or {^}, then press {Select}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Key tone" by pressing {V} or {^}, then press {Select}. 42 For assistance, please visit http://www. panasonic. com/consumersupport TG2388. book 43 Programmable Settings 4 5 Select "Off" or "On" by pressing {V} or {^}. Press {Save}, then press {OFF}. 4 5 6 Scroll to "Set flash time" by pressing {V} or {^}, then press {Select}. Press {Save}, then press {OFF}. Auto talk When this feature is turned on, you can answer a call by lifting the handset off the base unit or charger without pressing {C} or {s}. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Auto talk" by pressing {V} or {^}, then press {Select}. Press {Save}, then press {OFF}. Note: L The setting should stay at 700 ms unless pressing {FLASH/CALL WAIT} fails to pick up the Call Waiting call. L If PBX functions do not work correctly, consult your PBX supplier for the correct settings. Line mode If "Line in use" on the handset and "B S" on the base unit are not displayed properly, the line mode selection is incorrect. Set line mode to "A". Note: L If you subscribe to Caller ID service and want to view the caller's information on the handset display after lifting up the handset to answer a call, turn off this feature. 1 2 3 4 5 6 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Set tel line" by pressing {V} or {^}, then press {Select}. [. . . ] During the "Parts" Limited Warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. [. . . ]