User manual PANASONIC KXTG4021

[. . . ] Please read these operating instructions before using the unit and save them for future reference. consulte "Guía Rápida Española" , página 44. You must subscribe to the appropriate service offered by your service provider/telephone company. By installing this unit, you can extend the range of your phone system, to include areas where reception was previously not available. [. . . ] Note: L Phone numbers from the 4 most recently edited area codes are automatically edited. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. {MENU} i {V}/{^}: "Edit & Save" i {OK} Press {MENU} repeatedly until the phone number is shown in the desired format. 1 Local phone number Example: 321-5555 2 Area code ­ Local phone number Example: 555-321-5555 3 1 ­ Area code ­ Local phone number Example: 1-555-321-5555 Once you call back an edited number, the handset which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the handset as follows: ­ When the call is being received, the Caller ID number is displayed in the same format as the edited number. ­ After the call has ended, the caller's phone number is displayed in the {V}/{^}: "Edit & Save" i {OK} L To edit the number, press {MENU} repeatedly until the phone number is shown in the desired format. Available for: KX-TG4021/KX-TG4071 series (page 3) The answering system can answer and record calls for you when you are unavailable to answer the phone. Important: L Only 1 person can access the answering system (listen to messages, record a greeting message, etc. L When callers leave messages, the unit records the day and time of each message. Note for base unit and handset: L When the answering system is turned on, the ANSWER ON indicator on the base unit lights up. Memory capacity (including your greeting message) ­ The ANSWER ON indicator on the base unit flashes rapidly when the answering system is turned on. L When the message memory becomes full: ­ If you use the pre-recorded greeting message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. ­ If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. While a caller is leaving a message, you can listen to the call through the handset's speaker. When the unit answers a call, a greeting message is played to callers. You can use either: ­ your own greeting message ­ a pre-recorded greeting message {V}/{^}: "Greeting" i {OK} {V}/{^}: "Record greeting" i {OK} {V}/{^}: "Yes" i {OK} After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max. Listening to messages using the base unit When new messages have been recorded, the message indicator on the base unit flashes. L If new messages have been recorded, the base unit plays back new messages. L If there are no new messages, the base unit plays back all messages. If you erase or do not record your own greeting message, the unit plays a prerecorded greeting asking callers to leave a message. Resetting to a pre-recorded greeting message If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. [. . . ] ) TTY users (hearing or speech impaired users) can call 1-866-605-1277. If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. Parts Labor One (1) Year One (1) Year During the "Labor" Limited Warranty period there will be no charge for labor. During the "Parts" Limited Warranty period, there will be no charge for parts. [. . . ]