User manual PANASONIC KXTG1312FR

[. . . ] Important: L This unit is an accessory unit for use with Panasonic Digital Cordless phones. L This leaflet only describes the steps needed to install and use the unit. [. . . ] L This leaflet only describes the steps needed to install and use the unit. Refer to the base unit's operating instructions for accessory information, important information for safety, FCC and other information (for U. S. A. users only), and Industry Canada Notices and other information (for Canada users only). For best performance Placement L Install the unit within base unit range in an indoor environment. We recommend installing the unit in a raised position (such as on a wall). L Avoid positioning the unit close to objects that will interfere with reception, such as thick walls, radiators, metal shelving, etc. L For maximum distance noise-free operation, place the unit away from electrical appliances such as TV, radio, personal computer, or other telephone equipment. L The illustrations in these instructions may vary slightly from the actual product. ­3­ TGA405(bundle)(e). fm Page 4 Thursday, February 4, 2010 10:12 AM Troubleshooting Problem The unit does not work. Cause/solution L When the indicators do not light, the AC adaptor is not connected properly. L When the indicators do not light green, move the unit closer to the base unit. Deregister: 1 Unplug the AC adaptor, then press and hold {PROGRAM}. 2 While pressing and holding {PROGRAM}, re-connect the AC adaptor. 3 Keep pressing and holding {PROGRAM} for about 10 seconds until the STATUS indicator flashes amber. 2 Base unit: Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. ­ The next step must be completed within 90 seconds. 3 Range extender: Connect the AC adaptor, then wait until the STATUS indicator lights green. 4 Base unit: To stop the registration tone, press {LOCATOR}. [. . . ] Deregister: 1 Unplug the AC adaptor, then press and hold {PROGRAM}. 2 While pressing and holding {PROGRAM}, re-connect the AC adaptor. 3 Keep pressing and holding {PROGRAM} for about 10 seconds until the STATUS indicator flashes amber. 2 Base unit: Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. [. . . ]