User manual PANASONIC HC-V750EG

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC HC-V750EG. We hope that this PANASONIC HC-V750EG user guide will be useful to you.


PANASONIC HC-V750EG : Download the complete user guide (15132 Ko)

You may also download the following manuals related to this product:

   PANASONIC HC-V750EG (616 ko)
   PANASONIC HC-V750EG (610 ko)
   PANASONIC HC-V750EG (627 ko)
   PANASONIC HC-V750EG (633 ko)

Manual abstract: user guide PANASONIC HC-V750EG

Detailed instructions for use are in the User's Guide.

[. . . ] Open the fuse cover with a screwdriver. “EB” area code model only ∫ Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. [. . . ] Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used. Inserting/removing the battery ≥ Press the power button to turn off the unit. (l 14) Open the LCD monitor and install the battery by inserting it in the direction shown in the figure.   Removing the battery Be sure to hold down the power button until the status indicator goes off. Then remove the battery while supporting the unit to prevent it from dropping. Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked. A B Insert the battery until it clicks and locks. Battery holder BATT 10 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 11 ページ 2012年12月25日 火曜日 午後6時21分 Charging the battery When this unit is purchased, the battery is not charged. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. ≥ HC-X920 / HC-X929 / HC-X920M At the time of purchase, the confirmation screen for the Wi-Fi setup is displayed after setting the world time. ≥ When the unit is turned on for the first time, a message asking you to set the date and time will appear. Basic Selecting a media to record [HC-X920M] The card and built-in memory can be selected separately to record motion pictures or still pictures. 1 2 3 4 Change the mode to or . Select the menu. (l 21) MENU : [MEDIA SELECT] Touch the media to record motion pictures or still pictures. ≥ The media is selected separately to motion pictures or still pictures is highlighted in yellow. Touch [ENTER]. 16 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 17 ページ 2012年12月25日 火曜日 午後6時21分 Basic Changing the Recording Mode ∫ Intelligent Auto Mode The modes (appropriate for the condition) are set just by pointing the unit to what you want to record. Intelligent auto button Pressing the Intelligent auto button can change the Recording Mode. ≥ Pressing the Intelligent auto button when other Recording Modes are set will change to Intelligent Auto Mode. ∫ To change to the other Recording Modes 1 Touch the Recording Mode button icon. Q. MENU MENU 2 Touch the desired Recording Mode button icon. Mode Intelligent Auto Effect You can switch the mode to the Intelligent Auto Mode, which optimises settings to the recording environment you are in. You can add manually-adjusted brightness and colour balance settings to the Intelligent Auto Mode, and record. This option allows this unit to automatically adjust the shutter speed and aperture according to the scene you want to record. You can set the shutter speed, focus, White Balance, and brightness (iris/gain). Intelligent Auto Plus Creative Control* Scene Mode SCN MNL Manual * In Motion Picture Recording Mode only ≥ Pressing the Intelligent auto button while in Intelligent Auto Mode can also change the Recording Mode. VQT4R21 17 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 18 ページ 2012年12月25日 火曜日 午後6時21分 Basic Recording motion pictures 1 2 3 Change the mode to . T W Open the LCD monitor or extend the viewfinder. Press the recording start/stop button to start recording.  A B 4 Recording button icon When you begin recording, ; changes to ¥. Press the recording start/stop button again to pause recording. ≥ Recording can also be started/stopped by touching the recording button icon. (For Auto Focus only) 4 Press the button fully. 18 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 19 ページ 2012年12月25日 火曜日 午後6時21分 Basic Using the zoom Zoom lever/Zoom button icons T W T W 6 W T T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the range over which the zoom lever is moved. [. . . ] This unit is not displayed in the Wi-Fi setting screen of the smartphone. The Wi-Fi connection is disconnected immediately. ≥ It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone, but it is not a malfunction. ≥ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone. ≥ If there is a setting for avoiding poor connections in the Wi-Fi setting menu of the Android™ device 4. 0 or later version, turn it off. 24 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 25 ページ 2012年12月25日 火曜日 午後6時21分 Others Specifications High Definition Video Camera Information for your safety Power source: DC 9. 3 V (When using AC adaptor) DC 7. 2 V (When using battery) Power consumption: Recording; HC-X920 / HC-X929 / HC-X920M 9. 3 W HC-V750EG 8. 7 W Charging; 10. 3 W Motion picture recording format: [AVCHD]; AVCHD format version 2. 0 compliant (AVCHD 3D/Progressive) [iFrame]; MPEG-4 AVC file format compliant (. MP4) Motion picture compression: MPEG-4 AVC/H. 264 MPEG-4 MVC/H. 264 (AVCHD 3D) Audio compression: [AVCHD]; Dolby® Digital/5. 1 ch (built-in microphone), 2 ch (built-in microphone/external microphone) [iFrame], [MP4]; AAC/2 ch Recording mode and transfer rate: [1080/50p]; Maximum 28 Mbps (VBR) [PH]; Maximum 24 Mbps (VBR) [HA]; Average 17 Mbps (VBR) [HG]; Average 13 Mbps (VBR) [HE]; Average 5 Mbps (VBR) [iFrame]; Maximum 28 Mbps (VBR) [AVCHD 3D]; Maximum 28 Mbps (VBR) [SbS 3D]; Average 17 Mbps (VBR) Refer to the operating instructions (PDF format) for the picture size and recordable time of motion picture. Still picture recording format: JPEG (Design rule for Camera File system, based on Exif 2. 2 standard) MPO format compatible (3D still picture) Refer to the operating instructions (PDF format) for picture size of a still picture and number of recordable pictures. Recording media: SD Memory Card SDHC Memory Card SDXC Memory Card Refer to the operating instructions (PDF format) for details on SD cards usable in this unit. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC HC-V750EG




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC HC-V750EG will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.