User manual PANASONIC HC-V110

[. . . ] HC-V210&V210M&V110_EP_VQT4T56_mst. book 1 ページ ２０１３年１月１５日　火曜日　午前１０時４０分 Basic Operating Instructions High Definition Video Camera Model No. HC-V210 HC-V210M HC-V110 Please read these instructions carefully before using this product, and save this manual for future use. For more detailed explanation, please refer to “Operating Instructions (PDF format)” which is recorded in the enclosed CD-ROM. VQT4T56 until 2013/1/17 HC-V210&V210M&V110_EP_VQT4T56_mst. book 2 ページ ２０１３年１月１５日　火曜日　午前１０時４０分 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. of your High Definition Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. [. . . ] Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used. Inserting/removing the battery ≥ Press the power button to turn off the unit. (l 17) Install the battery by inserting it in the direction shown in the figure. Removing the battery  Be sure to hold down the power button until the status indicator goes off. Then remove the battery while supporting the unit to prevent it from dropping. Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked. A Battery holder Insert the battery until it clicks and locks. 10 VQT4T56 HC-V210&V210M&V110_EP_VQT4T56_mst. book 11 ページ ２０１３年１月１５日　火曜日　午前１０時４０分 Charging the battery When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time. ∫ Charging with an AC adaptor. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC. (The battery temperature should also be the same. ) / ≥ Use the supplied AC adaptor. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Similarly, do not use AC adaptors and USB cables from other equipment with this unit. (l 17) /  1 2 Connect the AC cable to the AC adaptor, then the AC outlet. Connect the AC adaptor to the DC input terminal [DC IN]. ≥ Be careful not to pinch the DC input terminal cover. It will turn off when the charging is completed. A DC input terminal ≥ Insert the plugs as far as they will go. VQT4T56 11 HC-V210&V210M&V110_EP_VQT4T56_mst. book 12 ページ ２０１３年１月１５日　火曜日　午前１０時４０分       A USB terminal B To the AC outlet ≥ Insert the plugs as far as they will go. 1 2 3 4 Open the LCD monitor. Connect the USB cable to the AC adaptor. ≥ Check that the plug portion of the AC adaptor is not loose or misaligned.  Plug the AC adaptor into the AC outlet. Connect the USB cable to the unit. ≥ The status indicator C will flash red with approx. It will turn off when the charging is completed. ∫ Connecting to the AC outlet If you turn on the unit while connecting with the AC adaptor, you can use the unit with power supplied from the outlet. When recording for a long time, keep the AC adaptor connected and use it together with the battery. 12 VQT4T56 HC-V210&V210M&V110_EP_VQT4T56_mst. book 13 ページ ２０１３年１月１５日　火曜日　午前１０時４０分 ∫ Connecting to a PC and charging. Charge the unit if you do not have the AC adaptor handy. Connect the USB cable  ≥ The status indicator B will flash red with approx. (Operation is not guaranteed with any other USB cables. ) ≥ Always connect directly to a PC. [. . . ] Change the mode to to play back. A B  HDMI mini connector [HDMI] AV connector [A/V] Basic Using the menu screen 1 2 Press the MENU button. Press 3/4/2/1 to select the top menu A, then press the ENTER button. 3 Select the submenu B using 3/4 and press 1 or press the ENTER button. 4 Select the desired item using 3/4/2/1, and press the ENTER button to set. 22 VQT4T56 HC-V210&V210M&V110_EP_VQT4T56_mst. book 23 ページ ２０１３年１月１５日　火曜日　午前１０時４０分 To get back to the previous screen Press 2 of the cursor button. Language selection You can select the language on the screen display and the menu screen. : [SETUP] # [LANGUAGE] # desired language To exit the menu screen Press the MENU button. ∫ About the information display Descriptions of the selected submenus and items displayed in Steps 3 and 4 are displayed. Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will erase and cannot be restored. : [SETUP] # [FORMAT MEDIA] # desired setting [Built-inMemory]*1/[SD CARD]/[HDD]*2 *1 *2 ≥ Media selection screen is not displayed when the USB HDD is not connected. [. . . ]