User manual OREGON MTR102

[. . . ] LED INDICATOR Flashes when the remote unit transmits a reading Only use new batteries as specified in this instruction manual. BATTERY COMPARTMENT Accommodates two (2) UM-4 or "AAA" size 1. 2°F) 433 MHz Maximum of 3 30 meters (open area) around 30 seconds Main unit Remote sensing unit Weight Main unit Remote sensing unit Dimension Main unit Remote sensing unit Note that once a channel is assigned to a remote unit, you can only change it by removing the batteries or resetting the unit. [. . . ] The kinetic wave display on the channel number indicates the reception of that particular channel is in good order. The reading for individual channel will be displayed for five seconds. The maximum and minimum recorded indoor temperatures and those of each channel will be automatically stored in memory. If you press [MEM] now, the maximum and minimum temperatures will have the same values as the current ones until different readings are recorded. When the temperature recorded at CHANNEL 1 falls to between -2°C (28. The alarm will sound every minute so long as the recorded temperature is within alarm range. Display features will continue to flash as a reminder that the temperature remains within the ice warning range. Congratulations on your purchasing of the MTR102 Multi-channel Cable Free In-out Thermomter. No wire installation is required between the main unit and the remote units. If without obvious reasons the display for a particular channel goes blank, press [CHANNEL] and [MEM] to enforce an immediate search. if that fails , check if the remote unit of that channel is still in place. Make sure the transmission is within range and path is clear of obstacles and interference. No reading will be shown if no remote unit is assigned to that channel. When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected. [. . . ] Do not subject the unit to excessive: force, shock, dust, temperature, or humidity. Such treatment may result in malfunction, a shorter electronic life span, damaged batteries, or distorted parts. Doing so will terminate the unit's warranty and may cause damage. [. . . ]