User manual OLYMPUS X940

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS X940. We hope that this OLYMPUS X940 user guide will be useful to you.


OLYMPUS X940 : Download the complete user guide (2330 Ko)

You may also download the following manuals related to this product:

   OLYMPUS X940 (2446 ko)

Manual abstract: user guide OLYMPUS X940

Detailed instructions for use are in the User's Guide.

[. . . ] DIGITAL CAMERA FE-4040/FE-4020/X-940 Instruction Manual ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. [. . . ] 10), “Charging the battery with the supplied USB-AC adapter” (p. 11) ● This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. ● Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. “The light is caught in the picture”. ● Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory “An error message is displayed”. “Error message” (p. 43) Date and time function “Date and time settings return to the default setting”. ● If the batteries are removed and left out of the camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. 12) Shutter button “No picture is taken when the shutter button is pressed”. ● Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Miscellaneous “The camera makes a noise when taking pictures”. ● The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. ● Press the q button to switch to the shooting mode. ● Wait until #(flash charge) stops blinking before taking pictures. 42 EN Error message When one of the messages below is displayed on the monitor, check the corrective action. Card problem The card write-protect switch is set to the “LOCK” side. • Erase unwanted images. *1 Card problem Use FG to select [FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory problem Use FG to select [MEMORY FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory/Card problem Take pictures before viewing them. Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. Problem with selected image Use a computer to print. JAMMED SETTINGS CHANGED*3 CARD ERROR WRITE PROTECT PRINT ERROR MEMORY FULL CANNOT PRINT*4 *1 CARD FULL CARD SETUP *2 *3 POWER OFF FORMAT SET OK *4 Before erasing important images, download them to a computer. This is displayed, for instance, when the printer’s paper tray has been removed. Do not operate the printer while making the print settings on the camera. This camera may be unable to print images taken by other cameras. MEMORY SETUP POWER OFF MEMORY FORMAT SET OK NO PICTURE PICTURE ERROR THE IMAGE CANNOT BE EDITED BATTERY EMPTY Battery problem Charge the battery. NO CONNECTION Connection problem Connect the camera and computer or printer correctly. Printer problem Load paper into the printer. NO PAPER EN 43 Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. Fast-moving object Focusing “Focusing on the subject” ● Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. [. . . ] performed by anyone other than Olympus or an Olympus authorized service station. Any defect or damage that occurs due to transport, a fall, shock, etc. Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS X940




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS X940 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.