User manual OLYMPUS PT-EP03

[. . . ] PT-EP03 Instruction Manual PT-EP03 http://www. olympus. com/ Jp En Fr De Sp Cs Kr ©2010 Printed in Japan VR319501 Instruction Manual Mode d'emploi Bedienungsanleitung Manual de instrucciones Thank you for buying the Underwater Case PT-EP03 (hereinafter Case). Please read this instruction manual carefully and use the product safely and correctly. Wrong usage may cause damage to the camera inside the Case due to water leakage, and repair may not be possible. Before use, perform an advance check as described in this manual. Introduction Unauthorized copying of this manual in part or in full, except for private use, is prohibited. [. . . ] 20 Replace consumable products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 EN 4 Supplied accessories for PT-EP03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparations Check the contents of the package Check that all accessories are in the box. Contact your dealer if accessories are missing or damaged. · Case body (Check that the O-ring is installed. ) · Silica gel (1g) · Silicone grease · O-ring remover · Hand strap · Authorized distributors list/Authorized service centres list · Instruction manual (this manual) CAUTION: After purchase, be sure to do maintenance even in brand-new condition. For how to maintenance the case, refer to P. 19. En EN 6 Names of the parts Open/close dial Slide lock Shutter lever ON/OFF button Accessory mount Body cap Optical fiber cable insertion slot, cap 8 Zoom dial *9 Mode dial knob *0 U button 1 2 *3 *4 5 6 7 *a *b *c *d ( (REC) button INFO (Info display) button G/Fn button F (Exposure correction) button/Cross-cursor button *e # button/Cross-cursor button *f OK button *g jY button/Cross-cursor button *h P button/Cross-cursor button *i MENU button *j (Erase) button *k q (Play) button l LCD monitor window m LCD hood n O-ring (POL-EP03) o LCD inner hood p Tripod seat En Note: Case operation parts marked by * corresponds to the operation parts of the digital camera. Installing the digital camera Check the digital camera Check the digital camera before loading it in the Case. 1. Battery Confirmation It is impossible to change the batteries when using the Case. Make sure that you have sufficient remaining battery capacity before use. 2. Check the remaining number of pictures Check that the image storage medium has enough room for the number of pictures you want to take. 3. Remove the strap, lens cap, filter and shoe cover from the camera. If the digital camera is loaded without removing the strap and lens cap, the Case cannot be sealed properly and may leak. 4. Attach the zoom gear (optional) and the antireflective ring (optional). Example of 14-42mm II lens Antireflective ring For details, refer to the instruction manual of the zoom gear and the antireflective ring. Zoom gear M. ZUIKO DIGITAL ED 14-42mm M. ZUIKO DIGITAL ED 14-42mm II M. ZUIKO DIGITAL ED 9-18mm PPZR-EP01 PPZR-EP02 PPZR-EP02 Antireflective ring POSR-EP01 POSR-EP03 POSR-EP02 En EN 10 Open the Case 1 Slide and hold the slide lock towards the arrow direction (1) and turn the open/close dial clockwise (2). 2 Open the rear lid of the Case gently. 1 2 Slide lock CAUTION: Do not exert too much force while turning the open/close dial. Doing so may damage the dial. Pop up the flash The camera's built-in flash cannot be used when the camera is in the Case. Be sure to pop up the flash to use the underwater flash. En EN 11 Load the digital camera 1 Confirm that the digital camera is OFF. 3 Insert a silica gel bag (1g) between the bottom of the digital camera and the Case. 2 3 CAUTION: · The silica gel bag will be caught when the Case is sealed and water leakage will occur. · Once silica gel has been used, the moisture absorption performance will be impaired. Always replace the silica gel when the Case is opened and closed. Make sure the camera is loaded properly Check the following points before sealing the Case. · Is silica gel inserted all the way at the specified location? [. . . ] (Be careful not to damage the groove with the tip of the O-ring remover. ) 3 Lift the O-ring, pinch it with your fingertips and pull it out of the Case. Remove any sand, dirt, etc. After visually checking that dirt has been removed from the O-ring, check for attached sand and other foreign matter, as well as for damage and cracks by squeezing the entire circumference of the O-ring lightly with your fingertips. Remove attached foreign matter from the O-ring groove with a clean cloth or a cotton swab. Also remove any sand or dirt attached to any part of the Case that comes into contact with the O-ring. CAUTION: · When a sharp object is used to remove the O-ring or to clean the inside of the O-ring groove, the Case and the O-ring may be damaged and water leakage may be caused. [. . . ]