User manual OLYMPUS CWPC-01

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS CWPC-01. We hope that this OLYMPUS CWPC-01 user guide will be useful to you.


OLYMPUS CWPC-01 : Download the complete user guide (520 Ko)

You may also download the following manuals related to this product:

   OLYMPUS CWPC-01 (533 ko)
   OLYMPUS CWPC-01 (531 ko)
   OLYMPUS CWPC-01 (527 ko)

Manual abstract: user guide OLYMPUS CWPC-01

Detailed instructions for use are in the User's Guide.

[. . . ] Otherwise, it is possible that any of the following accidents might occur. Injury from caused by a child getting fingers or other body parts caught in parts of this product which open and close. Please consult a physician immediately if any parts have been swallowed. Triggering of the flash in front of the eyes could cause permanent vision impairment. [. . . ] When a flash is used, shadows may appear at the edges of the picture. This is especially noticeable when taking wide-angle pictures in the macro mode. Do not use the following chemicals for cleaning, corrosion prevention, prevention of fogging, repair or other purposes. Applying any of these to the product directly or indirectly (with the chemicals in vaporized state) may cause cracking under high pressure or other problems. Chemicals which cannot be used Explanation Do not clean the product with alcohol, gasoline, Volatile organic solvents, thinner or other volatile organic solvents or with chemical detergents chemical detergents etc. The metal parts use stainless steel or brass, and washing with pure water is sufficient. When repair is required, please contact your dealer or nearest Olympus Service Station. Adhesive E-6 Do not perform operations other than specified in this instruction manual, do not remove or modify parts other than specified, and do not use parts other than specified. shall be in no way responsible for accidents involving immersion of a digital camera in water. shall not pay any compensation for accidents (injury or material damage) that may occur during use of this product. E-7 1. Preparations Check the contents of the package. Check that all accessories are in the box. Contact your dealer if accessories should be missing or damaged. Water Resistant Case Instruction manual (this manual) Authorized distributors list/ Authorized service centres list E-8 Names of the parts Hand strap Hand strap rings Mode dial knob Shutter button Lens window Buckle lock levers Buckle opener/closer levers (grip) Buckle hooks Quick View button Power switch button Zoom button Cross button OK/Menu button LCD monitor window Waterproof packing Shade hood Note : The controls on the water-resistant case marked "" correspond to the controls with the same names on the digital camera. The controls on the case operate the corresponding functions on the digital camera. For more details about these functions, refer to the digital camera's instruction manual. E-9 Master the basics. Before taking any pictures, make sure you have mastered the basics of using the case. How to press the shutter button Press the shutter button gently, so that there is no movement of the camera. Also take care not to cover the lens with your hand. Note: · For detailed instructions on shutter operation, refer to the digital camera's instruction manual. How to Use the zoom button The case is equipped with a zoom button that allows you to operate the zoom button of the installed digital camera. How to use the mode dial The case is equipped with a mode dial knob hat allows you to operate the mode dial of the installed digital camera. After installing the digital camera in the case, seal the case and confirm that the mode dial can be operated. E-10 2. Preliminary Check of the Case Check the product before use. Before using the case underwater, be sure to confirm that the case is leak-free by performing the preliminary test before installing the camera. After installing the camera, perform the water leakage test again. Preliminary test 1. Confirm that the case's waterproof packing is free of sand, dirt or other foreign matter. Before installing the digital camera in the case, immerse the empty case at the water depth at which you intend to use it to confirm that there is no water leakage. Sand, fibers, hair or other foreign matter sticking to the waterproof packing or the waterproof packing contact surface. CAUTION : · The best way to check for water leakage is to immerse the case at the water depth at which you intend to use it. If this is too difficult, water leakage also can be checked at a shallow depth with no water pressure. [. . . ] Also, do not expose the case to direct sunlight, as this may accelerate deterioration and deformation of the case and waterproof packing, leading to leakage. Maintaining Water Resistance Remove any foreign matter from the waterproof packing. Visually check that the waterproof packing is free of sand, dust and other foreign matter. If any foreign matter is attached, use a clean, lint-free cloth or similar material to remove the foreign matter. If the waterproof packing is damaged or cracked, do not use the case, especially underwater, since water leakage is likely to occur. CAUTION : · Do not remove the waterproof packing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS CWPC-01




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS CWPC-01 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.