User manual NOKIA WIRELESS HEADSET HS-26W

[. . . ] Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. 9242672/Issue 1 EN 9242672_HS26W_1_en. fm Page 3 Tuesday, August 2, 2005 1:34 PM Contents 1. 10 Switch the call between phone and headset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Metallic materials may be attracted to the headset, and persons with a hearing aid should not hold the headset to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased. Chargers and batteries Check the model number of any charger before using it with this device. The Nokia Wireless Headset (HS-26W) is intended for use with the AC-3, AC-4, and DC-4 chargers. Warning: Use only batteries and chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Charge the battery This device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. When the battery is fully charged, the green indicator light is displayed. The fully charged battery has power for up to 5 hours of talk-time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones, products that use a Bluetooth connection, usage settings, usage styles, and environments. 6 9242672_HS26W_1_en. fm Page 7 Tuesday, August 2, 2005 1:34 PM Get started Switch the headset on or off To switch on, press the power key for 3 seconds. The headset beeps, and the green indicator light starts to flash quickly. The headset beeps, and the red indicator light is displayed briefly. Pair the headset with a compatible phone 1. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. [. . . ] If the headset cannot connect to the default phone, the headset tries to connect to the last used phone. If the headset cannot connect to this phone either, start the connection from the desired phone. Clear the settings If you want to clear all the settings from the headset (for example, the list of paired devices), press and hold the power key and the volume key up for 10 seconds. After the settings are cleared, the headset beeps twice, and the red and green indicator lights alternate for several seconds. 10 9242672_HS26W_1_en. fm Page 11 Tuesday, August 2, 2005 1:34 PM Battery information 4. [. . . ]