User manual NOKIA INTERNET STICK CS-11 QUICK START GUIDE IN ENGLISH

[. . . ] Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia reserves the right to make changes and improvements to any of ENGLISH SAFETY Read these simple guidelines. Read the complete user guide for further information. SWITCH OFF IN RESTRICTED AREAS Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. QUALIFIED SERVICE Only qualified personnel may repair this product. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. WATER-RESISTANCE Your device is not waterresistant. [. . . ] Tip: To connect the device to a compatible computer using the Nokia Connectivity Cable CA-175D, connect the cable to the USB plug and the USB port on the computer. To install the device and the Nokia Internet Modem application, do one of the following: · In Windows, the installer opens automatically if the autorun feature is enabled. · In Mac OS, double-click the Nokia Internet Stick CS-11 setup icon and then the Nokia Internet Modem icon. · In Linux, double-click the CD drive and then the nokiaInternetmodem. deb icon. The application and the needed drivers are installed on your computer. Based on your SIM card, the device automatically tries to define the settings for the cellular network of your service provider (operator). When prompted, enter the personal identification number (PIN) code of your SIM card. The PIN code helps to protect your SIM ENGLISH card against unauthorised use and is usually supplied with the card. To disconnect the device from the computer, unplug the device from the USB port. You may need to stop the device before disconnecting it, if your operating system supports this function. because you have not entered the PIN code, if the PIN code request is enabled in the Nokia Internet Modem application. If the indicator light is green, the device is registered to a GSM network and transferring data. If the green light flashes, the device is registered to a GSM network, but the data connection is not active. If the indicator light is blue, the device is registered to a 3G network and transferring data. If the blue light flashes, the device is registered to a 3G network, but the data connection is not active. Indicator light If the indicator light is red, the device cannot register to a cellular network because the SIM card is not valid or properly inserted or cannot find a supported network in your location. If the red light flashes, the device is not registered to a cellular network Uninstall To uninstall the device and the Nokia Internet Modem application from your computer, do one of the following: · In Windows, select the uninstall application from the Start menu. ENGLISH · In Mac OS, select the uninstall icon in the Nokia folder. · In Linux, use the package manager. Connect to the internet For the availability of data services, pricing, and tariffs, contact your service provider. When a SIM card is inserted in the device, switch on the computer, and connect the device to the computer. If the Nokia Internet Modem application does not start automatically, do one of the following: · In Windows, start the application from the Start menu. For example, in Windows XP, select Start > Programs > Nokia > Nokia Internet Modem > Nokia Internet Modem. · In Linux, select Applications > Internet > Nokia Internet Modem. Check the network indicator light to see whether a network connection is available. [. . . ] These guidelines were developed by the independent scientific organisation ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2. 0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. [. . . ]