User manual NOKIA E50-1 DATASHEET

[. . . ] The necessary settings for Internet configuration are provided by your Internet Service Provider. If your Internet settings are incomplete or incorrect, please contact your service provider. Depending on your ISP or network operator, you may not need to fill in all of the settings. When you insert a SIM card, the device will read the necessary GPRS, MMS, and SMSC settings from the SIM card if they are available, and no manual configuration is necessary. Note that this may not work with all operators and SIM cards. Copyright © 2006 Nokia. [. . . ] During the connection, the operating speed may be less, depending on network conditions. If you select Automatic, the data transfer rate is determined by the network and may be affected by network traffic. 4 After setting up a basic Internet access point for Data call or High speed data (GSM only), select Back to save the settings and exit, or Options Advanced settings to define the following advanced settings: · IPv4 settings -- Enter the device IP and name server addresses for IPv4 Internet protocol. · IPv6 settings -- Enter the device IP and name server addresses for IPv6 Internet protocol. address -- Enter the IP address or the domain name of the proxy server. For example, domain names are company. com and organisation. org · Proxy port number -- Enter the proxy server port number. Proxy servers are intermediate servers between a browsing service and its users, which are used by some service providers. These servers may provide · · · · · · · additional security and speed up access to the service. Use callback -- Select Yes if you have a service that dials back to your device when you establish an Internet connection. or Use other no. , according to instructions from your service provider. Callback number -- Enter your data call phone number of your device, which the callback server uses. These servers may provide additional security and speed up access to the service. 7 Configuring text messages (SMS) Configuring text messages (SMS) Note: Before you can send and receive text messages, the following conditions must exist: ·The phone must be turned on. ·The network you are using must support the text message service. ·The text message settings must be defined. Configuring text message settings Select Menu Messag. Options Settings Text message to access the following text message settings. centre in use -- Select the message center you want to deliver your text messages. · Character encoding -- Select Reduced support to use automatic character conversion to another encoding system when available. · Receive report -- Select Yes if you want that the network sends you delivery reports on your messages (network service). · Message validity -- Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center. · Message sent as -- Convert the message to another format, such as Text, Fax, Paging or E-mail. Change this option only if you are sure that your message center is able to convert text messages into these other formats. [. . . ] If you select Restricted, creating multimedia presentations is not possible. · Access point in use -- Select the default access point to connect to the multimedia message center. All rights reserved. · · · · · · not be able to change the default access point if it is preset in your device by your service provider. Multimedia retrieval -- Select Always automatic to always receive multimedia messages automatically, Auto. [. . . ]