User manual NOKIA CAR KIT CK-1W

[. . . ] Never use a fuse with a higher rating! ENHANCEMENTS Use only approved enhancements. Do not connect incompatible products. Care and maintenance Your device is a product of superior design and craftmanship and should be treated with care. · Do not attempt to open the device other then instructed in this guide. · Do not use harsh chemicals, cleaning solvents or strong detergents to clean the car kit. [. . . ] Power cable CA-60P to connect the hands-free unit to the 12-V car battery 7. Antenna coupler to connect an external antenna when using a phone holder (optional) 10. Active mobile phone holder to connect a compatible mobile phone (sold separately) 11. Passive mobile phone holder to install a compatible mobile phone (sold separately) 12. GSM antenna (optional) Keep all small parts out of reach of small children. 5 English Getting started Configuration The CK-10 car kit can be installed in various ways. Before you start the installation, ask for professional advice on the configuration that would best suit your needs. Car kit with passive phone holder Car kit with active phone holder 6 Getting started Car kit with separate antenna coupler and external antenna Use of enhancements Ensure that only compatible products are connected to your car kit. Before you begin the installation, ask for professional advice on the enhancements that would best suit your needs. Microphone (component 8) The hands-free unit HF-7 comes with a built-in high-quality microphone. You can also connect an external microphone (for example, an MP-2 microphone) to the car kit to suit your particular needs. Note: Use of any other microphone than the microphone supplied with the CK-10 car kit may affect the transmission quality. Phone holder (passive/comp. 10) To connect a compatible mobile phone to the hands-free unit, you need a phone holder (not included in the sales package). Different phone holders are available for different phone models. 7 English Getting started Antenna coupler (component 9) You can install a separate antenna coupler (not included in the sales package) to connect an external antenna. A range of antenna couplers may be available for mobile phones and phone holders. An antenna coupler can improve invehicle reception of the mobile phone. You also need to install a phone holder (sold separately) that is compatible with the mobile phone to be used. If you want to install an external antenna (sold separately), you either need an antenna coupler that is compatible with the phone holder in use or a phone holder with a built-in antenna coupler. When installing the hands-free unit, ensure that it does not block the vents and is mounted securely and as vibration-free as possible. To mount the unit, attach the mounting plate supplied with the car kit and secure the hands-free unit using the screw that goes through the unit and the phone holder. Installing the hands-free unit (example only) When mounting the antenna coupler AD-14, AXF-13L or AXF-15S, place the washer HH-9 between the coupler and the mounting plate. 10 Installation Finally, insert the cover with the Nokia logo into the recess, and press it into place. Fix the mount for the phone holder on the dashboard or to any other location in the cockpit area where the display is clearly visible for the user and the keypad of the mobile phone is within easy reach of the user. Installing the microphone You can position the built-in microphone to point toward the user's mouth: loosen the securing screw, and carefully turn the microphone opening in the desired direction. While the microphone is in a suitable position, retighten the screw. Loudspeaker SP-3 To ensure good acoustic quality, mount the loudspeaker so that it points into the user's direction. It is recommended that you mount the loudspeaker a minimum distance of 1 metee (3 feet) away from the microphone to avoid feedback. If you want to use the loudspeaker installed in your vehicle with the car kit for audio output, ask your service technician for professional advice. 11 English Installation Connecting cables to hands-free unit HF-7 Power cable CA-60P Plug the power cable into the corresponding port of the hands-free unit. The wires in the cable harness are to be connected as shown in the wiring diagram. When a call is accepted, the car kit switches the yellow line (MUTE) to ground, muting the car radio. When the call is ended, the yellow line is separated from ground, and the car radio is unmuted. [. . . ] 12 Installation Note: Replace a blown fuse with a fuse of the same type and size. Never use a fuse with a higher rating. System cables CA-46 and CA-47 Two system cables are provided for connection of the hands-free unit with a compatible mobile phone, depending on whether the car kit is used with a phone holder or connected directly to the mobile phone. Connect the system cable CA-46 to active phone holders with a Pop-PortTM connector and the system cable CA-47 to passive phone holders. Functional test After you have installed your car kit, it needs to be checked to ensure that it is working properly. When testing the operation of the equipment, also check that it is mounted so that it does not impair the driver during operation of the vehicle. 13 English Some vehicles do not come with such a possibility. [. . . ]