User manual NOKIA BLUETOOTH HEADSET BH-607

[. . . ] The headset is provided with wind noise reduction and noise cancellation that helps you handle calls in noisy environments. Also, read the user guide for the device that you connect to the headset. Keep them out of the reach of small children. Note: The surface of this device does not contain nickel in the platings. The surface of this device contains stainless steel. My own key The headset has a shortcut key that you can set to perform different functions on a compatible Nokia device using the Nokia Accessory Setup Application. [. . . ] To switch off, press and hold the If the headset has been previously power key for about 2 seconds. The paired with a device, ensure that headset beeps, and the red indicator the headset is switched off, and light is briefly displayed. If the headset press and hold the power key for is not connected to a device within about 5 seconds until the blue about 30 minutes, it switches off indicator light starts to flash automatically. Within about 3 minutes, activate Pair and connect the headset the Bluetooth feature on your Before using the headset, you must device, and set it to search for pair and connect it to a compatible Bluetooth devices. the user guide of your mobile You can pair the headset with up to device. Select the headset from the list of to only up to two devices at a time. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to at least one device and is ready for use, the blue indicator light flashes slowly. To manually connect the headset to one or two last used devices, press and hold the answer/end key for about 2 seconds (when no devices are connected), or make the connection in the Bluetooth menu of the desired device. If you have a device connected to the headset and want to connect a second device, make the connection in the Bluetooth menu of the device. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. Basic use Change the earpad The headset may be provided with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place (13). Place the headset on the ear Gently push the earpiece against your ear. ENGLISH You can rotate the earpad to keep the headset securely in the ear (14). For example, if you use the headset on the right ear, you may need to rotate the earpad to the right for the best fit. If you wear an earring, ensure that it is not accidentally attached to the earpad. Slide the earloop behind your ear (10), and point the headset towards your mouth (11). The selected volume level is saved for the device that you currently use with the headset. Calls To make a call, use your mobile device in the normal way when the headset is connected to it. To redial the number you last called (if your mobile device supports this feature with the headset), when no call is in progress, press the answer/ end key twice. To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in Adjust volume progress, press and hold the answer/ The headset automatically adjusts the end key for about 2 seconds. To as described in the user guide of the manually adjust the volume, slide the mobile device. [. . . ] When the device warms to its normal temperature from a cold temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. ENGLISH · Do not drop, knock, or shake the device. · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. These suggestions apply equally to your device, charger, or any accessory. [. . . ]