User manual NOKIA BLUETOOTH HEADSET BH-213

[. . . ] headset do not need to be in line of sight, but they should be within 10 metres (33 feet) of each other. Connections may be subject to interference from obstructions, such as walls, or other electronic devices. The headset is compliant with the Bluetooth Specification 2. 0 + EDR supporting the Headset Profile 1. 1 and Hands-Free Profile 1. 5. Check with the manufacturers of other devices to determine their compatibility with this device. Bluetooth wireless technology Bluetooth wireless technology allows you to connect compatible devices without cables. [. . . ] Activate the Bluetooth feature on the phone, and set it to search for The headset beeps, and the green Bluetooth devices. Enter the passcode 0000 to pair multifunction key for about 5 seconds. Ensure that your phone is on and your phone and is ready for use, the the headset is off. Press and hold the multifunction key (for about 5 seconds) until the Basic use Place the headset on the ear To use the headset with the earloop, attach the earloop to it (8). To detach the earloop, gently pull it from the headset (9). ENGLISH Slide the earloop behind your ear (10), and point the headset toward your mouth. To change the earplug, pull the current earplug from the earpiece, and push the new earplug over the earpiece in the same position. To mute or unmute the microphone during a call, briefly press the middle of the volume key. To switch a call from the headset to a compatible phone, press and hold the multifunction key for about 5 seconds (the headset switches off). To switch the call back to the headset, press the multifunction key for about 2 seconds (the headset switches on). Calls To make a call, use your phone in the normal way when the headset is connected to it. To redial the number you last called (if your phone supports this feature with the headset), when no call is in progress, press the multifunction key twice. To activate voice dialling (if your phone supports this feature with the headset), when no call is in progress, press and hold the multifunction key Clear settings or reset To delete the pairings from the headset or reset the headset, switch off the headset, and press and hold ENGLISH the multifunction key for over 8 seconds. Troubleshooting If you cannot connect the headset to your compatible phone, check that the headset is charged, switched on, and paired with the phone. Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator light is displayed. Unplug the charger from the electrical plug and the device when not in use. [. . . ] When the device returns to its normal ENGLISH temperature, moisture can form inside the device and damage electronic circuit boards. · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. These suggestions apply equally to your device, charger, or any enhancement. If any device is not working properly, take it to the nearest authorised service facility for service. [. . . ]