User manual NOKIA BH-213

[. . . ] Please check with your Nokia dealer for details. 2 © 2008 Nokia. All rights reserved. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction With the Nokia Bluetooth Headset BH-213, you can make and receive calls while on the move. in line of sight, but they should be within 10 metres (33 feet) of each other. [. . . ] When the battery is discharged, the headset beeps every minute and the red indicator light flashes quickly. To switch off, press and hold the multifunction key for about 5 seconds. The headset beeps, and the red indicator light is briefly displayed. Pair the headset 1. Press and hold the multifunction key (for about 5 seconds) until the green indicator light starts to flash quickly. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the 5 Switch on or off To switch on, press and hold the multifunction key for about 2 seconds. All rights reserved. connection separately after pairing. When the headset is connected to your phone and is ready for use, the green indicator light flashes slowly. Basic use Place the headset on the ear To use the headset with the earloop, attach the earloop to it (8). Slide the earloop behind your ear (10), and point the headset toward your mouth. To change the earplug, pull the current earplug from the earpiece, and push the new earplug over the earpiece in the same position. Calls To make a call, use your phone in the normal way when the headset is connected to it. To redial the number you last called (if your phone supports this feature with the headset), when no call is in progress, press the multifunction key twice. To activate voice dialling (if your phone supports this feature with the headset), when no call is in progress, press and hold the multifunction key for about 2 seconds. Proceed as described in the phone user guide. 6 © 2008 Nokia. All rights reserved. To answer or end a call, press the multifunction key. To mute or unmute the microphone during a call, briefly press the middle of the volume key. To switch a call from the headset to a compatible phone, press and hold the multifunction key for about 5 seconds (the headset switches off). To switch the call back to the headset, press the multifunction key for about 2 seconds (the headset switches on). Clear settings or reset To delete the pairings from the headset or reset the headset, switch off the headset, and press and hold the multifunction key for over 8 seconds. Troubleshooting If you cannot connect the headset to your compatible phone, check that the headset is charged, switched on, and paired with the phone. Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. [. . . ] Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time. 8 © 2008 Nokia. All rights reserved. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. [. . . ]