User manual NOKIA 5000

[. . . ] In daily use, use the standby mode instead of switching the device off. To set the device to (or to exit) the standby mode, press and hold the power key for about 3 seconds. When you are asked to calibrate the screen, tap and briefly press the displayed crosshair with your finger. When you are asked to select the language, tap the desired language and The language is used for display texts and spoken navigation instructions. [. . . ] Set the date and time (including time zone and daylight saving), and tap . Carefully read and accept the displayed safety notice, and tap the right arrow. Now you can start to use the device. Set up Bluetooth connection 1. When the device asks you to start pairing from your phone, set your phone to search for Bluetooth devices, and select the navigation device (Nokia PND) from the list of found devices on your phone. Enter the passcode 0000 on your phone to pair and connect the navigation device to it. In some phones you may need to make the connection separately after pairing. When you are asked to download the contacts from your phone to the navigation device, tap Yes if you want to use the contacts saved in your phone with the navigation device. 4 Install the device in a car 2 3 5 6 1 4 Attach the mobile holder to the mounting device using the supplied screw (1), and snap the protection plate into place. To attach the mounting device to the windscreen, carefully push the locking lever toward the cup (2). Insert the navigation device into the mobile holder (3), and press the device backwards so that the two arms of the holder lock the device in place (4). (To release the device, push the arms. ) To adjust the vertical or horizontal position, use the screws (5) and (6). To charge the internal battery, connect the supplied charger to the mini USB port on the navigation device, and insert the charger plug into the 12 V cigarette lighter socket of your car. The starting point (usually your current location) of the search is shown at the top of the screen. and then Address to enter the address, Favourites to select a previously saved address, or GPS position to set your current location as the starting point. Tap the desired point of interest and the option that you want to use. Plan a route You can plan your route in advance, also without GPS connection. To plan a route, press the menu key, and tap Navigator > Destination. Select the start point for the route in the same way as a destination, and add it to the route (Via). To add a waypoint to the 8 route, tap +, and select the location in the same way as a destination. To delete a stopover from the trip, tap the stopover on the list and . To move to the previous or next waypoint, tap the arrow at the left or right side of the waypoint name. To return to the previous screen, tap the left arrow. Navigation settings Press the menu key, and tap Navigator > Settings and one of the following: · General settings -- You can select, for example, a voice for navigation instructions (VoiceSkin), the distance unit, and how the device reacts to TMC messages (Automatic, Manual, or Off). You can also set the device to show the location of speed/safety cameras on your route during navigation, if this feature is enabled in your device. Some jurisdictions prohibit or regulate the use of speed/safety camera location data. [. . . ] Some jurisdictions prohibit or regulate the use of speed/safety camera location data. Nokia is not responsible for the accuracy, or the consequences of use of such data. · Map settings -- You can select, for example, the 2D or 3D view and toggle between the night and day modes. · Route settings -- You can select, for example, the desired mode of transportation and define the routing settings, such as allow or avoid motorways. Call handling To connect the device to your phone using Bluetooth wireless technology, press the menu key, and tap Phone > . Call a saved contact To call a contact that you have downloaded from your mobile phone, press the menu key, and tap Phone > Contacts. [. . . ]