User manual NOKIA 3105

[. . . ] Nokia 3105 User Guide 9235338 Issue 2 EN Copyright © 2005 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. [. . . ] To activate/deactivate the wallpaper, select On/Off, respectively. Copyright © 2005 Nokia. All rights reserved. 47 Colour schemes To change the colour in some display components, for example, indicators and signal bars, press Menu, and select Settings, Display settings and Colour schemes. Banner This function can be used only if it is supported by your network operator or service provider. Please contact your service provider for more information. Display brightness To change the display contrast level used on the phone display, press Menu, and select Settings, Display settings and Display brightness. Use and to adjust the contrast level. Tone settings You can change the settings of the selected active profile. Select and change Incoming call alert, Ringing tone, Rhythmic backlight alert, Ringing volume, Vibrating alert, Message alert tone, Keypad tones, Warning tones and Alert for. You can find the same settings in the Profiles menu, see Profiles (Menu 4) on page 41. Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected caller group. Scroll to the caller group you want or All calls and press Mark. Copyright © 2005 Nokia. All rights reserved. 48 Enhancement settings This menu is shown only if the phone is or has been connected to some compatible Nokia audio enhancements, for example to a headset, or a radio, or a camera. Select one of the displayed enhancements (Handsfree, Headset, Loopset, Text phone). Select Default profile to select the profile the phone uses when the enhancement is connected. Select Automatic answer to set the phone to automatically answer an incoming call after five seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be available. Select Automatic to set the lights on for 15 seconds after a keypress. The Lights option is available only when Handsfree is selected. Security settings Press Menu, and select Settings and Security settings to change the security code, to define call restictions and to set up the Phone lock. Note: When security features that restrict calls are in use (Restrict outgoing calls), calls may be possible to certain emergency numbers in some networks (e. g. 112, 911 or other official emergency numbers). Copyright © 2005 Nokia. All rights reserved. 49 Phone lock With Phone lock set to On, you can prevent unauthorized use of your phone by a lock code and only incoming calls and calls to the unlocked phone number (see below) are allowed. Allowed no. when phone is locked To allow calls to certain numbers when the phone is locked select Allowed number when lock active. Change security code Your phone prompts you for a five-digit security code for certain features and commands. Access is granted only after the correct security code has been entered successfully. It is recommended that you change this code at once, write it down, and store it in a safe place away from your phone. Press Menu, and select Settings, Security settings and then Change security code. Call restrictions Press Menu, and select Settings, Security settings and then Call restrictions to restrict incoming or outgoing calls to a defined list of numbers. [. . . ] The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2. 0 Copyright © 2005 Nokia. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. [. . . ]