User manual NIKON SCAN 3.1.2 FOR WINDOWS XP

[. . . ] Windows XP Home Edition /Windows XP Professional Nikon Scan (Ver. 3. 1. 2) This manual is for those users who are running Nikon Scan (Ver. [. . . ] Select Install from a list or specific location and click Next. Caution (LS-2000 / COOLSCAN III Users) You will need the Windows XP compatible ASPI layer for your SCSI board or SCSI card in order to use the LS-2000 and the COOLSCAN III with Windows XP. Using a Scanner withWindows XP (Home Edition /Professional) xp-1 If, for example, the Inf Folder created when you ran the downloaded nsinfxp. exe file is inside "New Folder", click the Browse button, and select "C:\New Folder\Inf". Step 3 During the driver installation, the dialog shown at right will appear; click Continue Anyway, and carry on with the installation. Step 4 Click OK; the dialog shown below will be displayed. When the driver installation has been completed, the dialog shown below will be displayed; click Finish to close the wizard. As an example, the above screenshot shows the driver location as "C:\New Folder\Inf". Using a Scanner withWindows XP (Home Edition /Professional) xp-2 Step 5 Once registration is complete, follow the steps below to check that the scanner has been correctly registered with the system. Select Control Panel from the Start menu to display the window shown below. Click Performance and Maintenance. Step 7 The System Properties window will be displayed. Select the Hardware tab and click the Device Manager button in the Device Manager section. Step 6 The Performance and Maintenance window will be displayed. Click System. Using a Scanner withWindows XP (Home Edition /Professional) xp-3 Step 8 The Device Manager window will appear. Confirming that "Imaging Device" is listed in the Device Manager window, and click the "+" next to the listing. Step 10 The Properties dialog for your scanner will be displayed. [. . . ] Device registration is now complete Using a Scanner withWindows XP (Home Edition /Professional) xp-4 [. . . ]