User manual NIKON NICETOUCH ZOOM

[. . . ] With ISO 100 or 400 film, the exact film speed is automatically set in the camera. Hold the camera firmly, look in the viewfinder and adjust the zoom setting to the desired image size. Note: As no power switch is provided with this camera, the camera is activated everytime you press the shutter release button halfway, move the zoom lever or slide the Flash/Macro switch down. [. . . ] At the end of the roll, the film advance motor stops and the shutter is locked. Slide the film rewind switch in the direction of the arrow to rewind the film. Open the camera back and remove the film for processing without delay. Important: Film does not automatically start rewinding when film reaches the end of the roll. 3, 5 elements in 5 groups Universal focus system Mechanical lens shutter, fixed shutter speed of 1/90 sec. Zoom finder with field coverage over 80% Additive type: automatic resetting counter DX automatic settings to ISO 100, ISO 400 Automatic advancing, automatic rewinding via rewind switch, mid-roll rewinding possible Flash: Guide number 10 (ISO 100 and meters) Red-eye reduction: Lamp lights up when the shutter release button is pressed lightly while the Flash/Macro switch is ON. 13 rolls of 36-exposure film with flash for half of all exposures with LR6 batteries Power source: Two 1, 5V AA-size (LR6 type) batteries, NiCd battery and AA-size lithium battery not usable Other indicators: Flash ready-light, low light warning LED, film confirmation window —9- Dimensions: Weight: Approx. 2 oz) (without batteries) Specifications and design are subject to change without notice. I -26- Data imprinting functions Important:, A separate lithium battery for time and date functions is built in to this camera. For example, to set October 25, 1995 from current October 21, 1995, choose Year/Month/Day display. 3) Important: Once data is set correctly in one display mode, data in other display modes can also be set automatically. Press the Mode/Select button for approximately 2 seconds to start the digits blinking, and to press it twice more until the Day section blinks. Pressing it once lightly advances the digit by one and pressing it continuously advances it quickly. Finally, press the Mode/Select button to continue setting other sections. To complete the setting, press the Mode/Select button a few times until all data stops blinking. Date & Time imprinting • When the shutter is released, the data imprint indicator (PRINT) blinks indicating the imprinting is completed. [. . . ] N V 117473064 or any one of the authorized service stations at their respective addresses listed on the reverse side The original consumer purchaser in returning this Nikon product must prepay all postage, shipping, transportation, insurance and delivery costs to the repair facility. AA Retain this Worldwide Warranty with proot of purchase for your records Nikon ONE YEAR WORLDWIDE LIMITED WARRANTY (Excluding the Continental Unitod States, Alaska, Hawaii, Puerto Rico, U. Your Nikon equipment has been manufactured to the Highest quality standards by NIKON CORPORATION, Tokyo. [. . . ]