User manual NIKON MH-52

[. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. [. . . ] Should this occur, remove the battery and re-insert it into the MH-52 to continue charging. Should an abnormality or malfunction occur, discontinue use immediately and request repairs from your retailer or Nikon Service Bureau. * Shape of cable depends on country * Das mit Ihrem Ladegerät mitgelieferte Netzkabel kann von der hier gezeigten Abbildung abweichen. 1 Plug the power cable into the Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user's authority to operate the equipment. For USA only: Over AC 125V Use a power cord suited to the voltage in use with AC 250V AC 15A rated plugs (NEMA 6P-15) and a minimum of SVT type cord for insulation and for anything over AWG 18 in size. The battery is recharging charging is complete (battery is full) Remove the battery from the EH-21 as described above. Temperature is outside the designated range Use the adapter inside the designated temperature range. To ensure proper operation, read this manual thoroughly before using this product. [. . . ] The external appearance of the MH-52 may differ slightly from the illustration depending on the country or area of purchase. [. . . ]