User manual NIKON MB-D11

[. . . ] Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses, and can CAUTION radiate radio frequency energy and, if not installed and used in accordance with the instructions, may Modifications: The FCC requires the user to be noticause harmful inter ference to radio communicfied that any changes or modifications made to ations. [. . . ] Be sure to replace the contact cover on the camera and the contact cap on the MB-D11 when the battery pack is not in use. Be sure to place the camera contact cover in the contact cover holder and to keep the MB-D11 contact cap in a safe place to prevent loss. A PB-6D and PK-13 auto-extension ring are required when using PB-6 bellows with the MB-D11. Inserting Batteries The MB-D11 can be used with one EN-EL15 rechargeable Li-ion battery, or with six AA batteries. Before inserting batteries, be sure that the camera is off and that the MB-D11 control lock is in the L position. 1 Turn the MB-D11 battery-chamber latch to 2 Ready the batteries as described below. EN-EL15: Matching the indentations on the battery to the projections on the MS-D11EN holder, insert the battery with the arrow () on the battery toward the battery holder power terminals (Figure F- q). Press the battery lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure F- w). AA batteries: Place six AA batteries in the MS-D11 battery holder as shown in Figure G, making sure that the batteries are in the correct orientation. 3 Insert the battery holder in the MB-D11 and latch the battery-chamber cover (Figure H). The EP-5B Power Connector When using the EP-5B power connector, insert it into the MS-D11EN holder with the arrow () on the connector toward the battery power terminals. Press the connector lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure I- q). Open the holder power connector cover and pass the EP-5B power cable through the opening (Figure I- w). An option in Group d of the camera Custom Settings menu can be used to change the order in which the batteries are used. When the camera is drawing power from the MB-D11, a s icon is displayed in the control panel. To ensure that the camera shows the correct battery level when AA batteries are used, choose the appropriate option for MB-D11 battery type in the camera Custom Settings menu (Group d). [. . . ] Il multi power battery pack MB-D11 utilizza una batteria EN-EL15 ricaricabile oppure sei batterie di tipo AA (alcaline, Ni-MH o al litio) e presenta un pulsante di scatto alternativo, un pulsante AE-L/AF-L, un multiselettore e ghiere di comando principale e secondaria per scattare foto con orientamento verticale (ritratto). Le opzioni dei menu della fotocamera consentono di scegliere se utilizzare per prima la batteria della fotocamera o le batterie del multi power battery pack MB-D11. Multi power battery pack MB-D11 e accessori Multi power battery pack MB-D11 e accessori in dotazione Controllare che gli articoli elencati siano forniti in dotazione con il multi power battery pack MB-D11 (le batterie sono vendute separatamente). [. . . ]