User manual MOULINEX ZU500A10 INFINYPRESS

[. . . ] Coulis filter (E – raspberry colour) with wider holes to make thicker preparations, like coulis. - During the assembly, make sure that the dry residue strap is well placed on the filter (fig. Cut up the fruit and vegetables that are too large to fit through the feed tubes. [. . . ] Never put fruit stones, excessively hard foods (ice cubes, sugar cubes), extremely fibrous foods, 4 or meat into your juicer. Place one jug (N) under juice exit (J) and the other jug (N) under the dry residue exit (K) (fig. Press the Start/Stop button (M) to turn on the appliance, place the food in the feed tubes (B) and push them down using the pusher (A). Make sure that the spout (I) is in the “low” position (juice flow). The fruit and vegetables must only be inserted while the motor is running. Never use your fingers or other utensils to push food through the spout. Once the ingredients have passed through, let the appliance turn for a few more seconds in order to obtain the maximum amount of juice. Clean the residue exit (K) with a lightly moist and non-abrasive sponge. The pusher (A), the feed tube (B), the bowl (G), the screw (C), the juice collector (H) with the spout with drip-stop (I), the jugs (N), and the foam separator (O) can all go into the dishwasher. If the filters (D/E) are clogged, prewash them with warm water and washing up liquid and use the brush (P). If the filter residue exit is clogged, remove the residues using the other end of the brush (P). Do not clean the juice collector (H), the spout with drip-stop (I), the plastic parts (bowl (G), food presser (A), feed tube (B)) with the abrasive side of the sponge. Tips: To extract the screw (C) from the filter (D/E), turn both pieces together and then press on the screw. WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK PROBLEMS The appliance does not turn on SOLUTIONS - Make sure that all parts are correctly assembled. [. . . ] Tips: To extract the screw (C) from the filter (D/E), turn both pieces together and then press on the screw. WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK PROBLEMS The appliance does not turn on SOLUTIONS - Make sure that all parts are correctly assembled. If the safety mechanism shuts the appliance off again, take it apart, clean it and turn it on again. [. . . ]