User manual MOULINEX ZU500A10

[. . . ] Make sure you have removed all packaging before you start to use the appliance. Wash all the removable parts, rinse them out and dry them carefully: the pusher (A), the feed tube (B), the pressing screw (C), the filters (D and E), the residue strap (F), the bowl (G), the juice collector and the spout with drip-stop (H and I), the jugs (N). 1 TO 7 Assemble the appliance as indicated on the drawings and choose the filter according to the desired preparation: Juice filter (D – orange colour) with small holes to make juices. [. . . ] Once the ingredients have passed through, let the appliance turn for a few more seconds in order to obtain the maximum amount of juice. We recommend that you do not use the appliance continuously for over 20 minutes. After making your juice, activate the drip-stop system by pushing the spout up before removing the jug to stop the flow of the juice. If the juice contains froth, you can fit the foam separator accessory (O), onto the jug (N) which allows you to keep the froth inside the jug when you pour out the juice into a glass (fig. Practical tips when choosing ingredients: - Choose fruit and vegetables that are best for juicing such as oranges, apples, pears, pineapple, grapes, tomatoes, carrots, celery, cucumber, beetroot . - It is difficult to extract juice from some fruit and vegetables such as bananas, avocados, aubergines and figs. - When you press less juicy fruit (like bananas) and aromatic herbs, alternate with other juicy fruits or vegetables in order to facilitate extraction. - When you press long leaf herbs (such as wheatgrass), cut the leaves in 3 cm pieces in order to keep them from getting tangled around the pressing stem. 10 TO 12) Between 2 preparations It is enough to rinse the appliance without taking it apart by pouring water gradually into the feed funnel (B), with the appliance on. Never immerse the motor unit (L), power cord or plug in water or any other liquid. If necessary, use the brush (P), to clean the residue strap (F) (strap inseparable from the filter but you should slide open the silicone cover for cleaning purposes; if necessary, also use the end of the brush (P) to clean this area and then close the silicone cover. The brush can also be used to clean the bowl (G), juice collector (H) with spout with drip-stop (I). 5 Make sure to clean the inside of the screw (C) carefully; if necessary, use the brush (P). Clean the residue exit (K) with a lightly moist and non-abrasive sponge. [. . . ] We recommend that you let the appliance cool down for a few minutes, clean it, and then restart it by pressing the Start/Stop button (M). - Clean the appliance: wash, rinse out and dry: the feed tube (B), the pressing screw (C), the filter (D or E), the residue strap (F), the bowl (G), the jugs, the spout (H and I) and the dry residue colector (Q). - Make sure that the strap (F) is correctly positioned on the filter (to collect residues) and that it is in good condition. [. . . ]