User manual MOULINEX ZU 5008

[. . . ] 9 • To avoid the risk of electric shock, never use the appliance with wet hands or on a damp or wet surface. Never immerse the motor unit, power cord or plug in water or any other liquid. € Use the appliance on a flat, stable surface, away from water splashes. € Never leave the appliance unattended whilst connected to the power supply, even if for a few moments, especially where children are present. [. . . ] € Do not leave the power cord close to or in contact with sources of heat or sharp edges. € Take great care when handling the pressing stem and during cleaning, the blades are extremely sharp. € If your appliance “jams” during operation, switch off, disconnect from the power supply and check that it is not overloaded with ingredients. € Do not use your appliance if it does not operate correctly, if it has been damaged or if the power cord or plug is damaged. To maintain safety, these parts must be replaced by an Approved Service Centre. € Any intervention other than normal cleaning and maintenance by the customer must be performed by an Approved Service Centre. € For you own safety, only use accessories and spare parts from the appliance manufacturer, which are especially designed for your appliance. BEFORE FIRST USE Unpack the appliance and place it on a horizontal, solid and stable work-top, then take it apart completely. Make sure that you have removed all packaging before you start to use the appliance. Wash all the removable parts, rinse them out and dry them carefully: the pusher (A), the feed tube (B), the pressing stem (C), the filters (D and E), the residue strap (F), the bowl (G), the juice collector and the spout with drip-stop (H and I), and the jugs (N). 1 to 7 Assemble the appliance as indicated on the drawings and choose the filter according to the desired preparation: Juice filter (D – orange colour) with small holes to make juices. Take apart and clean all the removable parts: filters (D-E) (if necessary, use the brush (P)), residue strap (F) (inseparable from the filter but removable for cleaning purposes; if necessary, use the back end of the brush (P)), bowl (G), juice collector (H) with spout with drip-stop (I). Make sure to clean the inside of the stem (C) carefully; if necessary, use the brush (P). 11 Clean the residue exit (K) with a lightly moist and non-abrasive sponge. The pusher (A), the feed tube (B), the bowl (G), the stem (C), the juice collector (H) with the spout with drip-stop (I), the jugs (N), and the foam separator (O) can all go into the dishwasher. If the filters (D/E) are clogged, prewash them with warm water and washing up liquid and use the brush (P). If the filter residue exit is clogged, remove the residues using the back end of the brush (P). Do not clean the juice collector (H), the spout with drip-stop (I), the plastic parts (bowl (G), food presser (A), feed tube (B)) with the abrasive side of the sponge. Tips: To extract the stem (C) from the filter (D/E), turn both pieces together and then press on the stem. WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK PROBLEMS SOLUTIONS The appliance does not turn on - Make sure that all parts are correctly assembled. The appliance stops suddenly while functioning: the red light flashes The appliance turns off: the white light flashes Poor juice extraction - Press the Start/Stop button (M) to switch off the appliance. If the safety mechanism shuts the appliance off again, take it apart, clean it and turn it on again. [. . . ] If the safety mechanism shuts the appliance off again, take it apart, clean it and turn it on again. We recommend that you let the appliance cool down for a few minutes, clean it, and then restart it by pressing the Start/Stop button (M). - Clean the appliance: wash, rinse out and dry: the feed tube (B), the pressing stem (C), the filter (D or E), the residue strap (F), the bowl (G), the jugs, and the spout (H and I). - Make sure that the strap (F) is correctly positioned on the filter (to collect residues) and that it is in good condition. [. . . ]