User manual MOULINEX QA 404H

[. . . ] € Check that the power rating of your appliance corresponds to your electrical supply. € Your appliance is intended only for domestic culinary use, in an indoor setting and under supervision. € Always unplug the appliance as soon as you have finished using it and when you are cleaning it. € Do not use the appliance if it is not working properly or if it has been damaged. [. . . ] € Using the button (a2), release the multi-function head (a3) and raise it to the upper position. € Release the accessory (c1), (c2) or (c3) from the multi-function head by pushing the accessory into the head and rotating it clockwise a quarter turn. 2 - BLENDING/MIXING (DEPENDING ON MODEL) Depending on the nature of the food, you can use the blender (d) to prepare up to 1. 1 - ASSEMBLING THE ACCESSORIES • Place the multi-function head (a3) in the horizontal position: press the button (a2) and manually lower the multifunction head (a3) until it locks (the button (a2) returns to its initial position). € Unlock the safety cover (a5) from the high-speed outlet (a4) by rotating it anti-clockwise and then remove it. Indd 16 22/2/13 1:34 PM EN • Make sure that the appliance is switched off before locking the blender (d). € Lock the blender jug (d) on the outlet (a4) by rotating it clockwise. € Place the food in the blender jug, and lock the lid (d2) fitted with the measuring cap (d3), by rotating it anticlockwise. 2 - USAGE • Start by turning the selector button (a1) to the desired position according to the recipe. Use the “Pulse” position for better mixing control and for a better blending of your preparation. You can add food through the hole in the measuring cap (d3) during preparation. € To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop. Indd 17 22/2/13 1:34 PM EN • Unlock the mincer head in the reverse order of the assembly. Tips : - Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it into pieces of approximately 2 x 2 cm). - At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any meat remaining in the machine. 4 - GRATING / SLICING (DEPENDING ON MODEL) ACCESSORIES USED : - Attachment holder (e) - Assembled vegetable slicer (g) - Drums (depending on model) 4. 1 - ASSEMBLING THE ACCESSORIES • Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place. € Place the attachment (e) and lock it in the anti-clockwise direction such that the outlet is in alignment with the appliance. € Place the multi-function head (a3) in the horizontal position by pressing the button (a2) once again. € Make sure that the safety cover (a5) is locked correctly (clockwise) on the high-speed outlet (a4). € Facing the attachment (e) outlet, insert the drum body (g1) inclined to the right, aligning the two bayonets in the drum body with the two notches in the attachment. Push the drum body home and turn the drum body anticlockwise until it latches with the feed tube in the vertical position. [. . . ] Tips : • In the event any of your accessories are coloured by food (carrots, oranges, etc. ), rub with a cloth soaked in cooking oil and then clean them as usual. € Blender jug (d): pour some hot water containing a few drops of washing up liquid into the blender. After removing it, rinse the bowl in running water and allow to dry (bowl upside down). [. . . ]