User manual MOULINEX MO 6527

[. . . ] REPAIRS Repairs should only be carried out specialists using original replacement parts. REMOVE PACKAGING • Take your appliance out of its packaging. Keep your warranty card and carefully read the operating instructions before using your appliance for the first time. HINTS AND PRECAUTIONS • Before each use, the supply cord should be completely unwound. [. . . ] €¢ Fit the appropriate accessory to the end of the tube: - For rugs and wall-to-wall carpeting: use the head (22) with brushes lifted - fig. - For parquets and smooth flooring: use the nozzle (22) with the brush extended - fig. - For corners and other areas that are difficult to reach, use the slot attachment convertible into a brush* (25) in the flat attachment position. - For furniture, use the slot attachment convertible into a brush* (25) or the furniture nozzle (24). PLUGGING IN THE ELECTRICAL POWER CORD AND USING THE VACUUM CLEANER • Completely unwind the power cord, plug in your vacuum cleaner and push the on/off pedal (2) - fig. €¢ Set the suction power: - using the electronic power regulator (3): turn the switch on the electronic regulator to set the suction power: towards max position for floors and min position for furniture and fragile fabrics - fig. - with the mechanical power regulator on the grip: Open the manual suction regulator to reduce the suction power manually – for fragile surfaces, for example - fig. STORING AND TRANSPORTING THE APPLIANCE • After use, stop your appliance by pressing on the on/off pedal (2) and unplug it - fig. Replace the cable by pressing the automatic cable rewind pedal (4) - fig. €¢ In the horizontal position, hook the floor nozzle (22) onto its storage position at the rear of the appliance (1a) - fig. €¢ Upright, place the attachment (22) in its housing under the appliance (1b) - fig. €¢ Once completely dry, assemble the cassette HEPA filter (18): black foam filter (18a) and HEPA filter (18b) under the dust box (11) and replace the box in its housing (9) - fig. €¢ Ensure that the HEPA filter is completely dry before you put it back in the appliance. Make sure that all the filtration system is properly positioned before turning your appliance back on. MT0006 01) • Remove the flexible tube (19) from the suction opening (8) - fig. HEPA FILTER CAPSULE (18) • Simultaneously press the HEPA filter capsule opening clips (15) - fig. €¢ Separate the black foam filter (18a) from the HEPA filter (18b) - fig. €¢ Assemble the HEPA filter capsule (18): black foam filter (18a) and HEPA filter (18b) under the dust box (11) and replace the box in its housing (9) - fig. AIR OUTLET FILTER (17a) • Unclip the air outlet filter capsule (17) by lifting the locking clip (13) - fig. €¢ Lock the air outlet filter capsule (17) in its housing by pressing the clip (13), until you hear a click fig. *Depending on model: it means special equipment for some models or optional accessories. CLEAN THE VACUUM CLEANER • Clean the housing of the vacuum cleaner with a soft and humid rag and let dry with a dry rag - fig. [. . . ] Check that the tube and the pipe are not blocked or that the bag or filter are not full. Leave to cool down for 30 minutes before using the vacuum cleaner again. If you have any product problems or queries, please contact our customer Relations Team first for expert help and advice (see the contact details on the last page). Any professional use, innapropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. [. . . ]