User manual MOULINEX MO5265

[. . . ] To avoid danger, the whole reel and power cord unit of your vacuum cleaner must be replaced by a Moulinex Approved Service Centre. REPAIRS Repairs are to be performed only by specialists with original spare parts. A – Vertical carry grip b – Mobile horizontal handle for carrying 8. RS-RT900034), suitable for textile bags* Your vacuum cleaner is fitted with either a microfilter* or a HEPA filter cassette*. [. . . ] €¢ Upright, place the tool attachment (22) in its housing under the appliance (1b) – fig. €¢ Horizontal, place the tool attachment (22) in its housing at the back of the appliance (1a) – fig. €¢ Carry your vacuum cleaner easily using its carry handles (7a or 7b). CLEANING AND MAINTENANCE Important: Always stop and unplug your vacuum cleaner before maintenance or cleaning. CHANGING BAG •The bag full light (5) indicates that the bag is full or saturated. If you notice that your appliance is becoming less efficient, set it to maximum power and hold the nozzle up above the ground. €¢ Remove the flexible hose (18) from the suction opening (10) – fig. 2 • Open the lid (9) of your vacuum cleaner – fig. A) If your vacuum cleaner is equipped with a paper bag* (17a) or a Wonderbag Compact* (17c) : • Remove the bag support (15) from the bag compartment (8) - Fig. 15a, then remove the paper bag* (17a) or the Wonderbag Compact* (17c) from its support by sliding it along the runners (16) - Fig. €¢ Dispose of the paper bag* or the Wonderbag Compact* in a dustbin – Fig. 15c • Position a new paper bag* or a new Wonderbag Compact* on the support - Fig. 15e • Check that the bag and bag support (15) are correctly positioned before closing the lid (9). B) If your vacuum is fitted with a textile bag* : • Remove the bag support (15) from the bag compartment (8) – fig. 16a, then remove the textile bag (17b) from its support (15) by sliding it along its runners (16) – fig. €¢ Allow to dry for at least 24 hours (only put the bag back into position when it is completely dry) – fig. €¢ Reclose the textile bag: make sure that the zip is fully closed - fig. €¢ Reposition the textile bag onto the bag support - fig. €¢ Check that the textile bag and bag support (15) are correctly positioned before closing the lid (9). CHANGE THE MICROFILTER* (ref: MT0005 01) Your vaccum cleaner is fitted with a paper bag, change the MT0005 01 microfilter* every 6th bag change. * According to model: these systems are specific to certain models or are accessories available as an option. 8 • Open the lid (9) of your vacuum cleaner – fig. [. . . ] €¢ Check that the position of the nozzle (22) is suitable for the surface being hoovered: for rugs and carpets use the nozzle with the brush retracted - fig. IF THE POWER CORD DOES NOT WIND UP COMPLETELY • The cord slowed down as it was winding up: bring the cord back out and press the cord winder pedal again. iF YOUR VACUUM CLEANER STOPS WHILE IN OPERATION • The overheating protective device has been triggered. Check that the tube and the pipe are not blocked or that the bag or filter are not full. [. . . ]