User manual MOULINEX MO 4543

[. . . ] Shoulder strap cover* * According to model: these systems are specific to certain models or are accessories available as an option. 902185_Not Compacteo cyclonic:902185 20/05/09 8:51 Page 12 3. BEFORE USING FOR THE FIRST TIME UNPACKING • Unpack your appliance, keep your warranty card and read the instructions for use carefully before using your appliance for the first time. GB TIPS AND PRECAUTIONS • Before each use, the cord should be unwound completely. [. . . ] Be sure to observe the assembly direction ( ) indicated close to the on/off pedal (2). Always stop and unplug your vacuum cleaner before changing accessories. CONNECTING THE CORD AND STARTING THE APPLIANCE • Unwind the power cord completely, plug your vacuum cleaner in – fig. * According to model: these systems are specific to certain models or are accessories available as an option. 902185_Not Compacteo cyclonic:902185 20/05/09 8:51 Page 13 • Set the suction power: GB - using the electronic power regulator* (3): turn the switch on the electronic regulator* to set the suction power: towards maximum position for floors and minimum position for furniture and fragile fabrics – fig. - with the mechanical power regulator on the grip: open the slider on the grip to manually reduce suction power, e. STORING AND TRANSPORTING THE APPLIANCE • After use, stop your vacuum cleaner by pressing the On/Off pedal (2) and unplug it – fig. Wind the power cord by pressing the cord winder pedal (4) – fig. €¢ Upright, place the tool attachment (22) in its housing under the appliance (1b) – fig. €¢ Horizontal, place the tool attachment (22) in its housing at the back of the appliance (1a) – fig. €¢ Carry your vacuum cleaner easily thanks to its carry handles (6a or 6b) or its shoulder strap* (28). * According to model: these systems are specific to certain models or are accessories available as an option. 902185_Not Compacteo cyclonic:902185 20/05/09 8:51 Page 14 • Place the accessory* (18b) into the lock slot of the dust separator holder (17) - fig 20. • Close it , respecting the locking direction ( ) - fig 27. €¢ Clip the HEPA filter capsule (14) (black foam filter (14a) + HEPA filter (14b)) in the compartment - fig 28a. €¢ Close the dust compartment (13) and replace it in its housing (7) - 28b. CLEANING THE HEPA FILTER (14B) ) The air we breathe contains particles that may be allergens: mite larvae and droppings, mould, pollen, smoke and animal residues (hair, skin, saliva, urine). The smallest particles penetrate deep into the respiratory system where they can cause inflammation and cause lung impairment. HEPA filters (High Efficiency Particulate Air) are used to filter out the smallest particles. With the HEPA filter, the air released back into the room is healthier than the air that is vacuumed. Clean the HEPA filter capsule (14): black foam filter (14a) and HEPA filter (14b) every month. €¢ Remove the flexible pipe (19) from the suction opening (9) - fig. [. . . ] * According to model: these systems are specific to certain models or are accessories available as an option. 902185_Not Compacteo cyclonic:902185 20/05/09 8:51 Page 15 IF YOUR VACUUM CLEANER HAS NO SUCTION • An accessory or the hose (19) is blocked: unblock the accessory or the hose (19). • Ensure that the dust compartment (13) is properly mounted and present. €¢ The lid is not properly closed: check that the dust compartment (13) is properly in position and close the lid (8). [. . . ]