User manual MOULINEX MO 4021

[. . . ] MT0001 01) b - Grey foam filter Your vacuum clamer is equipped either with microfilter cassette* (a+b), or with a HEPA filter cartridge*. Flexible tube with extra-long handle and manual suction power regulator 20. Mini turbobrush* *Depending on model: it means special equipment for some models or optional accessories. 9 NoticeZÉLIO 7/06/07 14:43 Page 10 BEFORE USING FOR THE FIRST TIME 1. [. . . ] € Do not use the vacuum cleaner without a foam filter for protection of the motor. € Always stop and unplug your appliance before maintenance or cleaning. € This appliance is not designed to be used by people (including children) with a physical, sensory or mental impairment, or people without knowledge or experience, unless they are supervised or given prior instructions concerning the use of the appliance by someone responsible for their safety. € Children must be supervised to ensure that they do not play with the appliance. HINTS AND PRECAUTIONS • Before each use, the supply cord should be completely unwound. € If you use an electric extension cord, make sure that it is in perfect condition and appropriate to the power rating of your appliance. ASSEMBLING THE ELEMENTS OF THE APPLIANCE • Push the flexible hose (19) in the opening (10) until your hear a clicking sound - fig. € Fit the appropriate accessory to the end of the tube: - For rugs and wall-to-wall carpeting: use the head (23) with brushes lifted - fig. - For parquets and smooth flooring: use the nozzle (23) with the brush extended - fig. - For furniture: use the mini-brush on the convertible slotted attachment* (25) or the furniture attachment* (24). € Adjust the suction power: - With the electronic power selector (3): Turn the button of the electronic power regulator to adjust the suction power: to the max position for floors and to the min position for furniture and delicate fabrics fig. 1- The Hepa* filter cassette • Open the lid (9) of your vacuum cleaner fig. € Check that the Hepa* filter cassette (14) is fitted correctly before re-closing the lid (9). 11 NoticeZÉLIO 7/06/07 14:43 Page 12 TROUBLESHOOTING 1. IF YOUR VACUUM CLEANER DOES NOT START • The appliance is not plugged-in, check that the appliance is correctly plugged in. € The electronic variable suction power selector is in the minimum position. Increase the power with the help of the electronic variable suction power selector (except if you are vacuuming delicate fabrics). € If the mechanical power regulator on the power nozzle is open, close the mechanical power regulator. € The lid was not closed properly: check that the bag is properly installed and close the lid again. € If the bag fill indicator is red, the filtration system is saturated. - The microfilter cassette*: withdraw the microfilter from the cassette, and change it (ref. Wash the grey foam filter, squeeze it out and leave it to dry for at least 12 hours. [. . . ] IF THE POWER CABLE DOES NOT REWIND COMPLETELY • The power cable is slow in reentering its housing. Pull the cable back out and press on the automatic cable rewind pedal. If you have any product problems or queries, please contact our customer Relations Team first for expert help and advice (see the contact details on the last page). WARRANTY • This product has been designed for domestic use only. [. . . ]