User manual MOULINEX LM 3011

[. . . ] €¢ Always pour the liquid ingredients into the jug first, before adding the solid ingredients, without exceeding the maximum level. €¢ Never place your fingers or any other object in the blender when the appliance is running. €¢ Do not use the bowls as containers for freezing, cooking or sterilisation. €¢ Do not use the blender for more than 3 minutes continuously. [. . . ] €¢ Place the blender on a flat, stable, heat-resistant, clean and dry worktop. €¢ Do not remove the lid (c4) before the blades have stopped completely. €¢ Never use this appliance for blending or mixing items other than food ingredients. SAFETY LOCKING The appliance can run only when the jug (C) or accessories (D or E) are USING FOR THE FIRST TIME correctly positioned and locked on the motor unit (A). €¢ Before using your appliance for the first time, clean all the accessories (C, D, E, F) in warm soapy water, except for the motor unit (A). CAUTION: The blades are extremely sharp; handle them with caution when using or cleaning the appliance. €¢ Make sure all the packaging has been removed before operating the appliance. €¢ Important note: Turn the speed selector (B) to “0” before placing the blender jug or accessories on the motor unit. €¢ The appliance starts only if the jug or accessory is correctly positioned and locked on its body. €¢ Do not operate the blender if the lid is not in place. USING YOUR APPLIANCE • Place the assembly (c1+c2) on the base of the jug (c3). ) 40 g 1 rusk 60 g 60 g 10 g 40 g Operating time 3 s / speed 2 In pulses 6 sec / speed 1 In pulses In pulses 30 sec / speed 2 Accessory D D D D D E CLEANING YOUR APPLIANCE • Unplug the appliance and remove the accessories • Handle them with caution: the blades on the blender jug and accessories are sharp. €¢ Remove the jug and rinse it and its lid under running water. €¢ For easy cleaning, be sure to wash the removable parts in water and a little washing-up liquid immediately after use. €¢ The jug (C) and accessories (D, E) can be cleaned in the dishwasher in the top basket with the “ECO” or “LIGHTLY SOILED” programme. €¢ To clean the blender jug (C) easily, unlock the blade unit (c1) by rotating it through a quarter turn in the anticlockwise direction. Remove the gasket (c2) and clean them under running water or in the dishwasher. 10 Notice_0828485:Mise en page 1 4/06/10 12:06 Page 11 WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?The jug or accessory is not correctly positioned or locked on the motor unit. Check that the jug or accessories are correctly positioned and locked onto the motor unit as shown in the figure in the manual. The product is not placed on a Place the product on a flat flat, stable, heat-resistant surface. Reposition the gasket on the blade unit (d2) or (e2) and lock it correctly onto the bowl (F). [. . . ] Reposition the gasket on the blade unit (d2) or (e2) and lock it correctly onto the bowl (F). Add liquid Reposition the gasket, the 3 folds should be visible as shown in Fig. Impossible to lock the blade unit with the gasket (c1+c2) on the jug (c3). The blender jug gasket (c2) is not positioned correctly or is missing. [. . . ]