User manual MOULINEX FG2628

[. . . ] Before using it for the first time, check that your mains supply voltage matches that indicated on the appliance data plate. € Given the diverse standards in effect, if the appliance is used in a country other than that in which it is purchased, have it checked by an Approved Service Centre. [. . . ] € Allow the appliance to cool down completely before you clean and store it. Practical tests using appliances taken at random 14 are conducted and this may explain any possible traces of use. € The power cord must never be close to or in contact with hot parts of the appliance, close to a source of heat or resting on sharp edges. € Never place the appliance close to a wall or below a wall cupboard. € Never place the appliance below or close to easily inflammable objects (e. € After switching on your coffee maker, never put your hand on the warming plate when you are removing the jug from the coffee maker. While in operation, this plate has a very high temperature, which could cause burns. € In order to reactivate the program on your coffee maker, press the PROG button once. EN Program mode functioning Manual functioning • In order to program your coffee maker, press the PROG button once. € Set the hour and minutes according to the time you wish your coffee maker to start (please refer to "Programming", above). € The screen will display the set time and the green light signal (k) will turn on. € In order to display the current time again, briefly press the button. The red light signal will turn on and the coffee maker will start functioning. PLEASE NOTE Whether you use your coffee maker manually or in the program mode, it will turn off automatically 30 minutes after the end of each cycle. [. . . ] Descaling • Descale your coffee maker every month or every 40 cycles. You can use: - a packet of descaling agent diluted in two large cups of water. [. . . ]