User manual MOULINEX DJ300110 MOULINETTE COMPACT

[. . . ] Children must be supervised to ensure that they do not play with the appliance. € Check that the power rating of your appliance corresponds to your electrical supply. € Your appliance is intended only for domestic culinary use, in an indoor setting and under supervision. € Always unplug the appliance as soon as you have finished using it and when you are cleaning it. [. . . ] Your appliance comes with a microprocessor that controls and analyses the operating power. To restart your appliance, turn the rotary button (a1) to the “0” position and remove some of your ingredients. 3 - DISMANTLING THE ACCESSORIES • Wait for the appliance to come to a complete stop. € Using the button (a2), release the multi-function head (a3) and raise it to the upper position. € Release the accessory (c1), (c2) or (c3) from the multi-function head by pushing the accessory into the head and rotating it clockwise a quarter turn. 2 - BLENDING/MIXING (DEPENDING ON MODEL) Depending on the nature of the food, you can use the blender (d) to prepare up to 1. 1 - ASSEMBLING THE ACCESSORIES 1 - MIXING / KNEADING / BEATING / EMULSIFYING / WHISKING You can prepare up to 1, 8 kg of dough using the stainless steel bowl (b1) and its lid (b2) depending on the food. - Lid (b2) - Kneader (c1) or mixer (c2) or balloon whisk (c3) The paragraph numbering corresponds to the numbers in the diagrams. € Place the multi-function head (a3) in the horizontal position: press the button (a2) and manually lower the multifunction head (a3) until it locks (the button (a2) returns to its initial position). € Unlock the safety cover (a5) from the high-speed outlet (a4) by rotating it anti-clockwise and then remove it. € Make sure that the appliance is switched off before locking the blender (d). Remove the blender, and push the food down onto the blades and put your blender back to continue your preparation. € Always pour liquid ingredients into the blender jug first before adding solid ingredients. 3 - DISMANTLING THE ACCESSORY • Wait for the appliance to come to a complete stop before removing the blender by unlocking it in the anti-clockwise direction and put back the cover (a5) by locking it on the outlet (a4) (clockwise). 3 - MINCING (DEPENDING ON MODEL) ACCESSORIES USED : - Attachment holder (e) - Assembled mincer head (f) 3. 1 - FITTING THE MINCER ATTACHMENT • Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place. € Place the attachment (e) and lock it in the anti-clockwise direction such that the outlet is in alignment with the appliance. € Place the multi-function head (a3) in the horizontal position by pressing the button (a2) once again. 2 - ASSEMBLING THE MINCER HEAD • Hold the body (f1) by the feed tube, with the wider opening uppermost. € Fit the blade (f3) onto the short shaft protruding from the feed screw (f2) with the cutting edges facing outwards. € Fit the chosen screen (f4 or f5) on the blade (f3), aligning the two lugs with the two notches in the body (f1). € Screw the nut (f6) home on the body (f1) in the clockwise direction, without locking it. [. . . ] € Peel fruits with thick skins; remove stones and the core of pineapples. € It is not possible to extract juice from certain fruits and vegetables: bananas, avocado pears, blackberries, etc. € You can prepare juices with different fruits and vegetables without having to clean the juice extractor every time, the flavours will not be mixed. Just run the extractor with a little water to rinse it between two different juices. [. . . ]