User manual MOULINEX DD 9091

[. . . ] You must always remove the blades before emptying the bowls (Multifunction (E) and 600 ml (F) and 150 ml (I) mini chopper). Be very careful when handling the cartridges or the blades of the multifunction bowl (E) and the 600 ml (F) and 150 ml (I) mini chopper: they are extremely sharp. Never run the multifunction bowl (E), the 150 ml mini chopper (I), the 600 ml mini chopper (F) and the blender shaft (B1) without any food. Always unplug motor unit (A1) before performing any operations: assembly, disassembly and maintenance. [. . . ] The mixture must at least cover the bottom of the blender to ensure that the blending is efficient. Place the blade holder (E8) in the centre of the bowl (E) on the axis. If you wish to obtain this accessory, it is available from our after sales service (see list of approved centres enclosed) under the reference: MS0695636. Using the emulsifying disk (E10), you can make light mixtures (mayonnaise, pancake batter, whisked egg whites, whipped cream, etc. 5 - according to model) Place the cover lid (I3) in the bowl and then place the lid (I4) on top, ensuring that the drive mechanism is properly positioned on the blade. Carefully place the blade (I2) into the bowl (I) along the central axis, holding it by the plastic part as you do so. If you wish to obtain this accessory, it is available from our after sales service (see list of approved centres enclosed) under the reference: MS5981760. To dismantle your accessory after use, remove the motor unit (A1) from the lid (I4), remove the lid (I4) and the cover lid (I3), then carefully remove the blade (I2) (hold it by the plastic section) before removing the meat or food with a spoon or spatula. Carefully place the blade (F2) into the bowl (F) along the central axis, holding it by the plastic part as you do so. 5 – according to model) Set the motor unit (A1) in position on the reducer (E6). The feeder tube must be placed on the same side of the bowl as the handle. Handle the blades E4, E5, F2 and I2 or blades A, G, H with extreme care; they are very sharp. In the event that your accessories become colour stained by foods such as carrots, oranges, beetroot etc rub over them immediately after use with a cloth dipped in a little sunflower oil and then clean them as usual. Carefully remove the blade holder disc (E9) and the blade holder (E8) before removing the food. Then carefully remove the blades (A, G, H) from the blade holder disc (E9). Prepare a maximum of 1000g of food at a time (but not meat or cold meat products). Check that the lid (E3) to your multifunction bowl is properly locked. If it is not properly locked your motor unit (A1) will not be able to make your multifunction bowl work because the reducer drive system (E6) will not operate. start by checking the power cord and plug , then: What do I do if my appliance doesn’t work?Check whether the appliance’s safety system has not been activated, by processing too much mixture or by using the appliance for too long. Cleaning If the lid does not lock properly, press the unlocking button (E7) on the reducer (E6) before locking it again. You have carefully followed all these instructions, and yet your appliance still does not work? [. . . ] 2 L version multifunction bowl using the chopping knife) b) Chopping Knife: Pizza dough: 150 g of flour , 1/2 packet of baker's yeast , salt , 9 ml lukewarm water , 2 tablespoons of olive oil. - In the bowl fitted with the knife, fold in the flour, baker’s yeast and the salt. chocolate mousse (serves 6) 200g of cooking chocolate , 6 egg whites , 6 egg yolks. Melt the chocolate slowly over a bain marie to ensure you don’t burn it. [. . . ]