User manual MOULINEX BCA 141

[. . . ] If the socket outlets are not of the 13A BS 1363 type, and therefore do not accept the plug connected to this appliance, cut off the plug if moulded type or remove the plug if connected by screw terminals. When the plug is a moulded type and this is cut off from the appliance, the connected wires are a shock hazard. Do not under any circumstances connect a cut off plug into the electrical socket outlet. [. . . ] Do not under any circumstances connect a cut off plug into the electrical socket outlet. The cut off plug must be disposed of in a safe manner that prevents any form of connection. If the fuse cover is detachable, never use the plug with the cover omitted. Fit the appropriate plug according to the instructions in paragraph "Fitting a plug". 5 5 15/03/06, 12:20 alternative plugs a 15 amp fuse must be fitted either in the plug or adaptor or at the main fuse box. APPLIANCES WITHOUT FITTED PLUG FITTING A PLUG - IMPORTANT The wires in the mains lead are coloured in accordance with the following code: GREEN & YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN & YELLOW must be connected to the terminal in the plug which is marked with the letter ‘E’ or by the earth symbol or coloured green or green and yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter ‘N’ or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter ‘L’ or coloured red. 1 - Fill the water tank (A) with cold water, using the water level indicator as a guide. 2 - Swing the filter holder (C) and pour your ground coffee into a nº 2 filter positioned in 3 the filter support. A drip-stop system allows you to remove the coffee jug long enough to pour yourself a cup of coffee during preparation. Quickly replace the coffee jug to prevent the filter holder from overflowing. Either a sachet of descaler, first diluting it with 2 large cups of water. - Pour the preparation into the tank and run the coffee maker (without coffee). - Allow the descaling solution remaining in the coffee maker to work for 1 hour. - Rinse the coffee maker by running it 2 or 3 times with fresh water Soléa. [. . . ] - Allow the descaling solution remaining in the coffee maker to work for 1 hour. - Rinse the coffee maker by running it 2 or 3 times with fresh water Soléa. 5 6 15/03/06, 12:20 Please note: Keep the sachet of descaler out of reach of children. [. . . ]