User manual MITSUBISHI PEA-A12

[. . . ] English-6 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-7 Parts Name and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-8 Buttons, Switch, and Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-8 Connectors and Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use a Philips screwdriver to unscrew the screw for easy removal of the cover. Mount a CAT5 Rx BOX (option) on the option slot of the monitor. CAT5 for long-distance connection or multiple-monitor connection The CAT5 video connection function is for transmitting the analog RGB video signal of the computer and the control signal of the monitor over a long distance using CAT5 cables. The computer can control the monitor via the optional CAT5 Tx BOX and the CAT5 Rx BOX that is mounted on PEA-A12. CAUTION: Never connect network devices (such as a hub and a computer for LAN) to the CAT5 IN and OUT connectors of the CAT5 Kit. If they are connected, the network devices themselves, CAT5 Tx BOX, CAT5 Rx BOX, and monitor may be damaged. CAT Rx BOX CAUTION: Ensure that the CAT5 Rx BOX is positioned and oriented correctly and insert it as far as it will go. If you insert it in wrong position or wrong orientation, it may be damaged. Secure the CAT5 Rx BOX firmly using the screw that was unscrewed in step 2 so that the CAT5 Rx BOX won't drop off. 1. Installation of the USB driver for CAT5 serial communication control To connect the computer and the CAT5 Tx BOX via USB interface, it is necessary to install the USB driver to the computer from the CD-ROM supplied with the CAT5 Kit (option). (Installing the USB driver isn't necessary when the communication control isn't used or the RS-232C cable is used for connection. ) OS supported: Windows® XP, Windows Vista®, Windows® 7 How to install: Start the "PL2303_Prolific_DriverInstaller_v ***. exe" file in the Windows folder on the CD-ROM supplied with the CAT5 Kit (option) and install the driver according to the instructions displayed on the screen. NOTE: It is unnecessary to install the USB driver if you don't use the communication control or the USB driver. When the window asking you to install the driver is displayed, select cancel. Before installation, check the monitor operation in advance by connecting it with your computer and cables. Recommended cable: 8-pin modular connector, straight-through, shielded, Category 5 or 5e Commercially available cables that passed the compatibility test: 7929A of Belden, NFTP-C5e-GY of Nex1 English-23 English P-6 Connecting RS-232C Monitor control via RS-232C Carry out as necessary To control this monitor from a computer via a communication, connect this monitor and the computer using an RS-232C cable (commercially available). How to connect · · · Turn off the main power switch of the computer and this monitor. If you make a connection while the power is on, it causes a failure of the devices. Connect the computer and this monitor using a reverse type RS-232C cable (commercially available). In addition, when you connect two or more monitors as shown in the illustration below, connect the RS-232C OUT connector of the first monitor and the RS-232C IN connector of the second monitor using a reverse type RS-232C cable (commercially available). By repeating the connection in the similar way, you can connect monitors in a daisy chain configuration. Computer (RS-232C connection) RS-232C cable RS-232C RS-232C OUT RS-232C IN RS-232C OUT RS-232C IN Left side of LCD monitor (first monitor) RS-232C cable Left side of LCD monitor (second monitor) NOTE: When only the 25-pin serial port is equipped as the serial communication port on the computer, a conversion adapter (commercially available) is necessary for the connection. English-24 P-7 Connecting LAN Monitor connection using LAN Carry out as necessary How to connect · · · · Turn off the main power switch of the computer and this monitor. If you make a connection while the power is on, it causes a failure of the devices. Connect the computer and the LAN hub using a straight type LAN cable (commercially available). Connect this monitor and the LAN hub using a straight type LAN cable (commercially available). When you connect two or more monitors, you can connect the monitor and the LAN hub using a straight type LAN cable (commercially available) as described above. Computer (LAN connection) Left side of LCD monitor LAN LAN cable LAN hub LAN hub LAN cable LAN hub LAN CAUTION: Do not connect the CAT5 IN or the CAT5 OUT connector to the LAN connector. [. . . ] Power button does not respond · Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor. Image persistence · Please be aware that LCD Technology may experience a phenomenon known as "image persistence. " Image persistence occurs when a residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. [. . . ]