User manual MINOURA P-600AL

[. . . ] P-600AL "Closet Cyclist 2" instructions manual (2009/07) IMPORTANT NOTICES · For use of normal human-powered 2-wheel bicycles only. Heavy and long bikes such as tandem, electric assisted and downhill / freeride bikes don't fit P-600AL. [. . . ] Put the M6x40 bolt (type-A) with M6 Nylon Nut M6 Flat M6 Flat Washer into the front side Washer hole, then tighten to M6 Nylon Nut temporarily. B) Put the M6x40 bolt (type-A) with M6 Flat washer into the backside hole and tighten to M6 M6 Nylon Nut Nylon Nut firmly. Make sure the Main Pillar must cover on the bracket, not placing beside the bracket. B) M6x40 Bolt (type-A) Leg Base Plate Right Side Front Leg Height Adjuster 3 Required Tools for Assembling 1 x M5 Hex Wrench 1 x 10mm Spanner 1 x 13mm Spanner Bolt Type Recognition Type-A: plain type bolt (Fig. D) 5 Type-B: with Spring Washer MADE IN JAPAN Attach the Backside Leg on the back of the Main Pillar, then tighten with the supplied two M6x18 bolts (type-B) temporarily. Please note that you will tighten M6x18 Bolt these bolts firmly after installing the Reinforcement Bars. E) 6 Raise up the Reinforcement Bars and attach to the Main Pillar with the supplied M6x70 bolt (type-A), Plastic Shim, M6 flat washer and M6 Nylon nut. After installing the Reinforcement Bars, adjust the Backside Leg height to touch the floor all together, then tighten the M6x18 bolts on the Backside Leg firmly. To install the Stainless Band Clip, follow the steps below; 1) Once disassemble the Stainless Band Clip. It should be snapped in. Plastic Shim M6x70 Bolt Washer (type-A) Washer Reinforcement Bar Nylon Nut 7 (Fig. F) ! If the inside band end with welded nut has been angled against the bolt, you won't be able to screw the bolt in. Make sure the nut side end is properly set at right angle to the bolt. [. . . ] K) For More Information If you have any questions or need help, you should contact the dealer where you purchased or the Minoura distributor in your country first. Only when you cannot get enough service, you can contact us. MINOURA JAPAN (for ALL customers) 1197-1 Godo, Anpachi Gifu 503-2305 Japan Phone +81-584-27-3131 Fax +81-584-27-7505 Email minoura@minoura. jp Web www. minoura. jp MINOURA NORTH AMERICA (for U. S. [. . . ]