User manual MINOURA DS-520 ASSEMBLY
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MINOURA DS-520. We hope that this MINOURA DS-520 user guide will be useful to you.
 |
MINOURA DS-520 ASSEMBLY: Download the complete user guide (197 Ko) |
Manual abstract: user guide MINOURA DS-520ASSEMBLY
Detailed instructions for use are in the User's Guide.
[. . . ] Remove one end cap from the connection bar with taking care the slot nut is not removed, then insert the bar through the frame. [. . . ] Remove one end cap from the connection bar with taking care the slot nut is not removed, then insert the bar through the frame. Replace the end cap on the connection bar and fully tighten the bolt using Frame a M5 hex wrench.
End Cap M6 Bolt M6 Slot Nut Connection Bar
1
The DS-110H is a high postion mount for increasing the height of the stand when used either on it's own or connected to several other stands. Remove both M6 bolts from the frame with taking care the slot nuts are not removed, then slide the DS110 into the DS-110H from the side. Please note that the minimum compatible wheel size is 20".
For More Information
!
For additional support, please first contact your supplier. MINOURA NORTH AMERICA minoura@minoura. jp MinouraUSA@ATTglobal. net http://www. minoura. jp Made In Japan [. . . ] Please note that the minimum compatible wheel size is 20".
For More Information
!
For additional support, please first contact your supplier. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MINOURA DS-520
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MINOURA DS-520 will begin.