User manual MINOURA DS-110 DS-100H

[. . . ] [. . . ] Please ensure the connection bar is fitted to the DS110, not the DS-110H. <DS-110H> 2 M6 Slot Nut M6 Bolt ! When using a single DS-110, the connection bar should be fixed in the center. If more than one DS-110 stands are to be connected, the connection bar should be fixed at the end of the bar. One side frame can be adjusted to accommodate to your tire width. Loosen both M6 bolts, adjsut the frame position, then tighten both bolts firmly. Move Side Frame End Cap M6 Slot Nut Connection Bar 2 ! Fix Side Frame M6 Bolt < To Open> <To Close> M6 Bolt <Completed DS-100 & 110H> 3 To stand a bicycle in the DS-110, simply insert the wheel into the frame. Do not use the DS-110 and DS110H on their own without the connection bar as it will not be stable enough to support the bicycle. Layout Example <Combination of DS-110 and DS-110H> (Place the bike on the lower stand first. ) <Horizontal Layout> (using DS-110H alternately) <Angled Layout> ! Please ensure the wheel is securely inserted into the frame and is supported by the spokes. If using wheels with unique spokes or design please ensure that the wheel is fully supported. [. . . ] [. . . ]